+- PINE64 (https://forum.pine64.org)
+-- Forum: PinePhone (https://forum.pine64.org/forumdisplay.php?fid=120)
+--- Forum: General Discussion on PinePhone (https://forum.pine64.org/forumdisplay.php?fid=127)
+--- Thread: Question about HW switches (/showthread.php?tid=9969)
Question about HW switches - GloriousCoffee - 05-28-2020
Hi
Quick question about the kill-switches,
The Wiki says 3) Microphone: On enables audio input from on-board microphones (not 3.5mm jack), off disables.
Does that mean, if switch 5 (Headphone: On enables audio input and output via the 3.5mm audio jack, off switches the jack to hardware UART mode) is active and switch 3 is off, it will only allow audio in/out via 3.5mm? Or am I misunderstanding this?
RE: Question about HW switches - GloriousCoffee - 05-30-2020
-bump-
RE: Question about HW switches - dukla2000 - 05-30-2020
Switch 3 OFF means the onboard microphone is disabled.
Switch 5 is the Front Camera
Presuming you meant Switch 6 ON then audio in is possible via the 3.5mm. Audio out is possible via onboard speaker and/or 3.5mm.
RE: Question about HW switches - GloriousCoffee - 05-30-2020
Yes, that is the switch, sorry about that.
That is awesome, exactly what I wanted.
Very much looking forward to getting the PinePhone
