+- PINE64 (https://forum.pine64.org)
+-- Forum: Pinebook Pro (https://forum.pine64.org/forumdisplay.php?fid=111)
+--- Forum: General Discussion on Pinebook Pro (https://forum.pine64.org/forumdisplay.php?fid=112)
+--- Thread: Problem booting Pinebook Pro (/showthread.php?tid=9783)
Problem booting Pinebook Pro - gimy16 - 05-03-2020
Hi!
I'd installed Manjaro 20.04 in my PBP; I did all the mirrorlist change stuff, and I shut it down 2 days ago. Today when I was going to boot it, a red light has shown and it is not opening or doing anything else.
When I try to reinstall the Manjaro 20.04 I pressed ES after 15-20 seconds and there is a black window with blank letters that say:
"[5.102225] EXT4-fs error (device mmcblk1p2): ext4_journal_check_start:84
etected aborted journal[5.103046] EXT4-fs (mmcblk1p2): Remounting filesystem read-only"
Today I tried to disable eMMc and installing Manjaro again but the problem persists. I have only been able to mount the Default Debian image from an SD card, but I don't know how to reinstall it to the eMMc or try to boot the eMMc another way... Any ideas?
Thanks very much!
(05-03-2020, 09:47 AM)gimy16 Wrote: Hi!
I'd installed Manjaro 20.04 in my PBP; I did all the mirrorlist change stuff, and I shut it down 2 days ago. Today when I was going to boot it, a red light has shown and it is not opening or doing anything else.
When I try to reinstall the Manjaro 20.04 I pressed ES after 15-20 seconds and there is a black window with blank letters that say:
"[5.102225] EXT4-fs error (device mmcblk1p2): ext4_journal_check_start:84: Detected aborted journal
[5.103046] EXT4-fs (mmcblk1p2): Remounting filesystem read-only"
Today I tried to disable eMMc and installing Manjaro again but the problem persists. I have only been able to mount the Default Debian image from an SD card, but I don't know how to reinstall it to the eMMc or try to boot the eMMc another way... Any ideas?
Thanks very much!
RE: Problem booting Pinebook Pro - waweic - 05-18-2020
Did you check the integrity of the image you downloaded? Maybe using another SD-card might help too.
RE: Problem booting Pinebook Pro - Dendrocalamus64 - 05-18-2020
Besides quoting it, you can check the "Disable Smilies" checkbox when posting or editing the post to stop it from turning :D :P &c into emoji.
RE: Problem booting Pinebook Pro - gimy16 - 05-25-2020
(05-18-2020, 04:55 PM)waweic Wrote: Did you check the integrity of the image you downloaded? Maybe using another SD-card might help too.
I tried to use another image and using another SD-card, the result was the same.
Then I contacted with the Pine64 support, and finally they said that it could be problem of the motherboard and that I had to change it.
RE: Problem booting Pinebook Pro - gimy16 - 06-10-2020
Finally I got an USB to eMMC adapter from Pine64, I connect thee eMMC of my PBP to my PC and it was empty! So I downloaded the Manjaro image again, and I installed it into the eMMC using etcher; probably I did something wrong in order to erase all the data froom the eMMc; but now it's solved!
Thanks to all the community for the support!