+- PINE64 (https://forum.pine64.org)
+-- Forum: PinePhone (https://forum.pine64.org/forumdisplay.php?fid=120)
+--- Forum: PinePhone Software (https://forum.pine64.org/forumdisplay.php?fid=121)
+---- Forum: UBPorts on PinePhone (https://forum.pine64.org/forumdisplay.php?fid=125)
+---- Thread: Not booting with latest ubports image (/showthread.php?tid=9684)
Pages:
1
2
Not booting with latest ubports image - mattpenn - 04-18-2020
Hello,
Hope everyone is doing OK and staying safe in their respective lock downs!
I'm having a strange issue with the latest ubports image: it wont boot.
- With the UBPorts SD card in I am just not able to boot the phone at all, either plugged in to power or not.
- Sometimes after pressing and holding power there is brief white/green flash of the status LED.
- Confirmed that battery had charge by booting PMOS on another SD card.
- Reproduced the same issue by writing the same UBPorts image to the known working SD card.
Has anyone else experienced anything similar? I had used UBPorts without issue on the same device a few weeks back and like I say the same issue is not observed with PMOS.
Cheers,
Matt
RE: Not booting with latest ubports image - drpi - 04-18-2020
(04-18-2020, 10:17 AM)mattpenn Wrote: Hello,
Hope everyone is doing OK and staying safe in their respective lock downs!
I'm having a strange issue with the latest ubports image: it wont boot.
The image used was yesterday's successful build of the UBPorts CI written to SD card with Etcher.
- With the UBPorts SD card in I am just not able to boot the phone at all, either plugged in to power or not.
- Sometimes after pressing and holding power there is brief white/green flash of the status LED.
- Confirmed that battery had charge by booting PMOS on another SD card.
- Reproduced the same issue by writing the same UBPorts image to the known working SD card.
Has anyone else experienced anything similar? I had used UBPorts without issue on the same device a few weeks back and like I say the same issue is not observed with PMOS.
Cheers,
Matt
I was just about to post the same kind of message.
Builds #289 and #290 don't boot. One can only see a brief green flash at the notification LED few seconds after power-ON/Reset.
RE: Not booting with latest ubports image - tso4ev - 04-19-2020
I cant boot it too
RE: Not booting with latest ubports image - mattpenn - 04-19-2020
Looks like this is now getting tracked on GitLab: https://gitlab.com/ubports/community-ports/pinephone/-/issues/87
RE: Not booting with latest ubports image - acamsonne - 04-19-2020
(04-19-2020, 03:15 AM)mattpenn Wrote: Looks like this is now getting tracked on GitLab: https://gitlab.com/ubports/community-ports/pinephone/-/issues/87
will have to try later images but March 30th image did boot, the ones a few days before April 18th did not boot.
I was wondering, is there a pinephone emulator or virtual machine ? Would save some time to test the files, than downloading and writing to SD to test.
RE: Not booting with latest ubports image - Mangled - 04-19-2020
Hey,
Same issue here. Even tried flashing the image directly to emmc using the jump drive. No luck here.
RE: Not booting with latest ubports image - acamsonne - 04-19-2020
Image 285 is working for me
RE: Not booting with latest ubports image - theyama - 04-20-2020
(04-19-2020, 04:35 PM)acamsonne Wrote: Image 285 is working for me
Now it was fixed by adding flash-kernel to newest builds. I tried 292 - works fine.
RE: Not booting with latest ubports image - acamsonne - 04-20-2020
Bug was fixed, build 293 boots now
RE: Not booting with latest ubports image - noeman5 - 04-23-2020
I had the same problem, but after several reflashes and retries, I got it to boot, but the display had SEVERE flashing issues. I am now flashing build 298, hoping for better.