PINE64
Pine's HDMI-VGA adapter - Printable Version

+- PINE64 (https://forum.pine64.org)
+-- Forum: PINE A64(+) (https://forum.pine64.org/forumdisplay.php?fid=4)
+--- Forum: Pine A64 Hardware, Accessories and POT (https://forum.pine64.org/forumdisplay.php?fid=32)
+---- Forum: Accessories (https://forum.pine64.org/forumdisplay.php?fid=15)
+---- Thread: Pine's HDMI-VGA adapter (/showthread.php?tid=948)

Pine's HDMI-VGA adapter - SkimMilk - 05-04-2016

Not a rant post, just an information post and hopefully Pine team can revamp the adapter design.

So, I bought the adapter along with the board.
I'm still exploring, but I find that the audio port on the VGA adapter is on the wrong side.
The awkward position resulted in the audio connector pushing on the ethernet and power cables.

[Image: IMG_8620.jpg] [Image: IMG_8621.jpg]

Yes there's the onboard 3.5mm audio jack but for some applications (or OS), it seems to only want to output via the HDMI connector.

For example: on xubuntu image by long sleep updated by Pine (20160502), it only lists 1 output device: sndhdmi Analog Stereo, and that's via HDMI, so I'm left with no choice but to connect via the adapter. If only the port was on the other side (plus the markings on the adapter)...

RE: Pine's HDMI-VGA adapter - janeku - 06-28-2016

looks like it is not working either.
I tried to connect earphones and no sound at all. I think workaround with Longsleep's patch will result in functional output. I will test it today or tomorrow and post it out if it works.
If Longsleep could help and give us guide line for this.

RE: Pine's HDMI-VGA adapter - JasperBrown - 06-28-2016

I have this one...
https://www.amazon.de/gp/product/B00ZMV7RL2/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1


Translated:
"Built-in active IC chip improves compatibility."


The problem is the HDMI standard - old one is compatible with analogue signals new one not.
https://en.wikipedia.org/wiki/HDMI#Versions

So no special issue of the pine.

RE: Pine's HDMI-VGA adapter - xalius - 06-28-2016

I use a short HDMI extension cable so I dont have to plug my adapters into the board directly, helps release mechanical strain on the board connector too. As for the analog audio jack, you need to load the audio codec driver and configure ALSA correctly, then you can use both outputs for example with pulseaudio.

RE: Pine's HDMI-VGA adapter - wpersin - 01-18-2017

(05-04-2016, 10:28 PM)SkimMilk Wrote: Not a rant post, just an information post and hopefully Pine team can revamp the adapter design.

So, I bought the adapter along with the board.
I'm still exploring, but I find that the audio port on the VGA adapter is on the wrong side.
The awkward position resulted in the audio connector pushing on the ethernet and power cables.

[Image: IMG_8620.jpg] [Image: IMG_8621.jpg]

Yes there's the onboard 3.5mm audio jack but for some applications (or OS), it seems to only want to output via the HDMI connector.

For example: on xubuntu image by long sleep updated by Pine (20160502), it only lists 1 output device: sndhdmi Analog Stereo, and that's via HDMI, so I'm left with no choice but to connect via the adapter. If only the port was on the other side (plus the markings on the adapter)...
Does the HDMI adapter output of 3.5mm sound out work if HDMI is not connected to TV or monitor?