+- PINE64 (https://forum.pine64.org)
+-- Forum: PinePhone (https://forum.pine64.org/forumdisplay.php?fid=120)
+--- Forum: PinePhone Software (https://forum.pine64.org/forumdisplay.php?fid=121)
+---- Forum: PostmarketOS on PinePhone (https://forum.pine64.org/forumdisplay.php?fid=124)
+---- Thread: dd problem (/showthread.php?tid=9307)
dd problem - pnphn - 02-28-2020
I was able to receive call and after building a small apache website on it i thought it was time to try to boot from the emmc. By the way I was able to do this with all the information the community shares. So credits to all of you!
Anyhow I did something terribly wrong with the learning about dd
Disk /dev/mmcblk0: 29.85 GiB, 32026656768 bytes, 62552064 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x1ffa72c7
Device Boot Start End Sectors Size Id Type
/dev/mmcblk0p1 * 2048 139263 137216 67M 83 Linux
/dev/mmcblk0p2 139264 3282943 3143680 1.5G 83 Linux
Disk /dev/mmcblk2: 14.7 GiB, 15762194432 bytes, 30785536 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x73746d91
Device Boot Start End Sectors Size Id Type
/dev/mmcblk2p1 2048 29296875 29294828 14G 83 Linux
anyone that knows how to fix this? Preferably when I'm sshed in the phone.
Thank you
