Firmware/Keyboard Failure on ANSI PBP - Printable Version +- PINE64 (https://forum.pine64.org) +-- Forum: Pinebook Pro (https://forum.pine64.org/forumdisplay.php?fid=111) +--- Forum: Pinebook Pro Hardware and Accessories (https://forum.pine64.org/forumdisplay.php?fid=116) +--- Thread: Firmware/Keyboard Failure on ANSI PBP (/showthread.php?tid=9088) |
Firmware/Keyboard Failure on ANSI PBP - Jeremiah Cornelius - 02-08-2020 I had a complete freeze and failure on ANSI PBP while running a Debian dist-upgrade (Bullseye). The system now boots to login, including with stock MrFixit, but there's no keyboard or trackpad input of any kind - this includes USB KB inserted any stage, prior to or after boot. I've tried different SD, eMMC, and disconnecting nvme. This occurred with a modified image, but KB problems are present on stock image from SD and original u-boot. One of my eMMC images was quick enough with original uBoot, to allow me a capture of multiple firmware load failures - however I'm at a loss as to spotting what might be incidental and what is catastrophic: [ 3.504734] mncbiki: mnci:aaaa SC64G 59.5 GiB [ 3.523071] mmcblki: pl p2 p3 p4 p5 p6 starting version 241 [ 3.760892] dummc_rockchip fe310000.dummc: Successfully tuned phase to 42 [ 3.764240] mmc0: new ultra high speed SDR104 SDIO card at address 0001 [ 4.018666] rockchip-vop ff8f0000.vop: Adding to iomnu group 1 [ 4.020009] nvme nvme0: pci function 0000:01:00.0 [ 4.020526] name 0000:01:00.0: enabling device (0000 -> 0002) [ 4.031670] rockchip-vop ff900000.vop: Adding to iommu group 2 [ 4.033363] es8316 1-0011: Failed to get IRQ O: -22 [ 4.054998] rockchip-drm display-subsystem: bound ff8f0000.vop (ops vop_compo hent_ops [rockchipdrn]) [ 4.060769] rockchip-drm display-subsystem: bound ff900000.vop (ops vop_compo hent_ops (rockchipdrn]) [ 4.061659] rockchip-dp ff970000.edp: no DP phy configured [ 4.063349] rockchip-drm display-subsystem: bound ff970000.edp (ops rockchip_p_component_ops [rockchipdrm]) [ 4.064512] cdn-dp fec00000.dp: Direct firmware load for rockchip/dptx.bin fa iled with error -2 [ 4.065361) rockchip-drm display-subsystem: bound fec00000.dp (ops cdn_dp_component_ops [rockchipdrm]) [ 4.066197] [drm] Supports ublank timestamp caching Rev 2 (21.10.2013). [ 4.066786] [drm] No driver support for ublank timestamp query. [ 4.073824] rk808-rtc rk808-rtc: registered as rtco [ 4.0997221 panfrost ff9a0000.gpu: clock rate = 500000000 [ 4.100425] panfrost ff9a0000.gpu: mali-t860 id OX860 ma jor 0x2 minor Oxo status Ox0 [ 4.100433] panfrost ff9a0000.gpu: features: 00000000, 100e77bf, issues: 00000000,24040400 [ 4.100438] panfrost ff9a0000.gpu: Features: L2:0x07120206 Shader:Ox00000000 Tiler: 0x00000809 Mem:0x1 MMU: 0x00002830 AS:Oxff JS:0x7 [ 4.100443] panfrost ff9a0000.gpu: shader present=0xf 12_present=0x1 [ 4.102384] [drn) Initialized panfrost 1.1.0 20180908 for ff9a0000.gpu on minor 1 [ 4.186405] asoc-simple-card es8316-sound: ES8316 HiFi <-> ff890000.i2s mapping ok [ 4.186472] asoc-simple-card es8316-sound: ASOC: no DMI vendor name! [ 4.191364] input: rockchip,es8316-codec Headphones as /devices/platform/es8316-sound/sound/cardo/inputo [ 4.450694] Console: suitching to colour frame buffer device 240x67 [ 4.531517] rockchip-drm display-subsystem: fbo: rockchipdrmfb frame buffer device [ 4.571110] [drm] Initialized rockchip 1.0.0 20140818 for display-subsystem on minor 0 [ 5.110039] cdn-dp fec00000.dp: Direct firmware load for rockchip/dptx.bin failed with error -2 [ 7.190036] cdn-dp fec00000.dp: Direct firmware load for rockchip dptx.bin failed with error -2 [ 11.270010] cdn-dp fec00000.dp: Direct firmware load for rockchip/dptx.bin failed with error -2 [ 19.670005] cdn-dp fec00000.dp: Direct firmware load for rockchip/dptx.bin failed with error -2 [ 33.749939] vcc5vo_typec: disabling [ 36.309983] cdn-dp fec00000.dp: Direct firmware load for rockchip/dptx.bin failed with error -2 [ 64.619873] nvme nvme0: Device not ready; aborting initialisation [ 64.620773] nvme nvem0: Removing after probe failure status: -19 Begin: Loading essential drivers ... [ 64.681169] usbcore: registered new interface driver uvcvideo [ 64.681967] USB Video Class driver (1.1.1) [ 64.775051] platform regulatory.o: Direct firmware load for regulatory.db failed with error -2 [ 64.775985] cfg80211: failed to load regulatory.db done. Begin: Running scripts/init-premount ... [ 65.058879] ttys2 - failed to request DMA done, Begin: Mounting root file system ... Begin: Running scripts/local-top Please unlock disk mncblk1-RootFS: [ 65.177859] random: cryptsetup: uninitialized urandom read (4 bytes read) [ 68.949936] cdn-dp fec00000.dp: [drm:cdn_dp_pd_event_work [rockchipdrm]] *ERROR* Timed out trying to load firmware Anyone with suggestions or know-how? Help is welcome. RE: Firmware/Keyboard Failure on ANSI PBP - bcnaz - 02-08-2020 (02-08-2020, 05:46 PM)Jeremiah Cornelius Wrote: I had a complete freeze and failure on ANSI PBP while running a Debian dist-upgrade (Bullseye). Could this possibly be related to the "spill" you posted about previously ? Replacement keyboards will hopefully be available soon |