+- PINE64 (https://forum.pine64.org)
+-- Forum: PINE A64(+) (https://forum.pine64.org/forumdisplay.php?fid=4)
+--- Forum: Android on Pine A64(+) (https://forum.pine64.org/forumdisplay.php?fid=5)
+--- Thread: Boot Loop (/showthread.php?tid=819)
Boot Loop - mmeadows - 04-28-2016
Hey All,
I've tried the Ubuntu image and the Android image. Android gets to the starting app screen then immediately bounces back to the previous splash screen and loops. Ubuntu begins to load then shuts down.
I've tried 3 different power supplies (now using a raspberry pi 2.5 PS) I have no network or peripherals connected. I've tried 3 different displays.
I'm using the 2Gig board. Any help would be appreciated.
RE: Boot Loop - mmeadows - 04-28-2016
tried XUbuntu, Android (burned using linux image writer and phoenix card version) and now Remix OS Pheonix card version. Still boot looping. Did full GParted format on the card each time.
RE: Boot Loop - AA666 - 04-28-2016
I suggest to connect Pine directly to TV, instead of display, without any HDMI-DVI and other adapters, perhaps with different HDMI cables.
RE: Boot Loop - mmeadows - 04-28-2016
I was connecting directly to a television. I finally got remix to boot. Not sure what was going on. Guess I'll deal with it. Wifi functioning but LAN is not.
RE: Boot Loop - AA666 - 04-28-2016
(04-28-2016, 10:45 AM)mmeadows Wrote: I was connecting directly to a television. I finally got remix to boot. Not sure what was going on. Guess I'll deal with it. Wifi functioning but LAN is not.
As far I remember Pine still have a Gigabit port issue on Remix and Android, I'm using 100Mb switch to connect it to LAN.
RE: Boot Loop - tllim - 04-28-2016
(04-28-2016, 06:21 AM)mmeadows Wrote: Hey All,
I've tried the Ubuntu image and the Android image. Android gets to the starting app screen then immediately bounces back to the previous splash screen and loops. Ubuntu begins to load then shuts down.
I've tried 3 different power supplies (now using a raspberry pi 2.5 PS) I have no network or peripherals connected. I've tried 3 different displays.
I'm using the 2Gig board. Any help would be appreciated.
Seems like power issue, please make sure the microUSB cable (if not comes with power supply) capable on supply enough current.