Sata power cable - Printable Version +- PINE64 (https://forum.pine64.org) +-- Forum: ROCKPRO64 (https://forum.pine64.org/forumdisplay.php?fid=98) +--- Forum: RockPro64 Hardware and Accessories (https://forum.pine64.org/forumdisplay.php?fid=102) +--- Thread: Sata power cable (/showthread.php?tid=7783) |
Sata power cable - sputnik13 - 07-31-2019 Has anyone tried splitting the output from the sata power cable https://store.pine64.org/?product=rockpro64-power-cable-for-dual-sata-drives to use with 4 drives? It's unclear to me whether the output is supposed to be 3A per module or 3A total (1.5A power module). With drives that have low current startup like the barracuda 2.5" I feel like 3A would be plenty for 4 drives if it was 3A per module. RE: Sata power cable - tllim - 08-15-2019 (07-31-2019, 10:32 PM)sputnik13 Wrote: Has anyone tried splitting the output from the sata power cable https://store.pine64.org/?product=rockpro64-power-cable-for-dual-sata-drives to use with 4 drives? 5V 3A per module but still not advise to run 4 drives. |