RockPro64 with OpenMediaVault - Ethernet card is not recognized - Printable Version +- PINE64 (https://forum.pine64.org) +-- Forum: ROCKPRO64 (https://forum.pine64.org/forumdisplay.php?fid=98) +--- Forum: General Discussion on ROCKPRO64 (https://forum.pine64.org/forumdisplay.php?fid=99) +--- Thread: RockPro64 with OpenMediaVault - Ethernet card is not recognized (/showthread.php?tid=7286) |
RockPro64 with OpenMediaVault - Ethernet card is not recognized - eduapof - 03-20-2019 Hello guys, I'm having a lot of problems with the RockPro64 card. Need help! I think I'm doing something wrong because the system goes up without recognizing the network card and some OpenMediaVault modules. 1) I am using the version of the 4Gb card; 2) I'm using a 64Gb eMMC; 3) I always use the balenaEtcher for system flash; 4) I've tried several summers of OpenMediaVault: Examples of the most common: a) -> http://wiki.pine64.org/index.php/ROCKPro64_Software_Release#OpenMediaVault b) -> https://sourceforge.net/projects/openmediavault/files/4.1.3/ Error: I believe that the card does not present problems, because the version of Ubuntu 18.04 Bionic usually works with all the components, recognizing the network card and other peripherals. RE: RockPro64 with OpenMediaVault - Ethernet card is not recognized - Neo2018 - 04-07-2019 I have the error message too. Load your image from here. > ayufan-rock64/linux-build >latest for armhf stretch-openmediavault-rockpro64-0.8.0rc8-1116-armhf.img.xz RE: RockPro64 with OpenMediaVault - Ethernet card is not recognized - g_t_j - 04-13-2019 (04-07-2019, 04:53 AM)Neo2018 Wrote: I have the error message too. Would you care to share your experience on how the RockPro64 NAS build performs? Is it stable and reliable? How about its power consumption, speed, efficiency? Do you think there’s enough horsepower to run a series of plugins as Transmission, Plex, Owncloud, Domoticz, Pi-hole and Ubiquiti controller at the same time? RE: RockPro64 with OpenMediaVault - Ethernet card is not recognized - Luke - 04-18-2019 (04-13-2019, 01:56 PM)g_t_j Wrote:(04-07-2019, 04:53 AM)Neo2018 Wrote: I have the error message too. There is. However streaming from Plex server will (depending on the format) put considerable strain on the SOC. RE: RockPro64 with OpenMediaVault - Ethernet card is not recognized - g_t_j - 04-18-2019 (04-18-2019, 07:17 AM)Luke Wrote:(04-13-2019, 01:56 PM)g_t_j Wrote:(04-07-2019, 04:53 AM)Neo2018 Wrote: I have the error message too. Good. I guess the jury's still out until I receive my parts and assemble it. Plex is not a primary need anyway and if I set it up eventually it's going to serve one stream at a time. The other plugins are however. I already placed my order yesterday but have not received any shipping info as of now. As it's been years since I backed my original Pine64 boards, do you by any chance know if I'm going to receive any tracking or shipping info any time soon or should I just wait until they show up one morning at my doorstep? RE: RockPro64 with OpenMediaVault - Ethernet card is not recognized - Luke - 04-18-2019 Does OMV have a Nextcloud plugin? I had to install it alongside OMV ... was a bit of a pain from what I remember. RE: RockPro64 with OpenMediaVault - Ethernet card is not recognized - g_t_j - 04-18-2019 (04-18-2019, 07:33 AM)Luke Wrote: Does OMV have a Nextcloud plugin? I had to install it alongside OMV ... was a bit of a pain from what I remember. Nextcloud , Owncloud, either way I'll be happy. RE: RockPro64 with OpenMediaVault - Ethernet card is not recognized - Luke - 04-18-2019 (04-18-2019, 07:53 AM)g_t_j Wrote:(04-18-2019, 07:33 AM)Luke Wrote: Does OMV have a Nextcloud plugin? I had to install it alongside OMV ... was a bit of a pain from what I remember. I wasn't 'stating', I was genuinely asking if there is a *[foss]cloud plugin for OMV (?) RE: RockPro64 with OpenMediaVault - Ethernet card is not recognized - g_t_j - 04-18-2019 (04-18-2019, 08:23 AM)Luke Wrote:(04-18-2019, 07:53 AM)g_t_j Wrote:(04-18-2019, 07:33 AM)Luke Wrote: Does OMV have a Nextcloud plugin? I had to install it alongside OMV ... was a bit of a pain from what I remember. I'm not sure, however I'm under the impression there's one of the 2 available as a plugin. |