+- PINE64 (https://forum.pine64.org)
+-- Forum: General (https://forum.pine64.org/forumdisplay.php?fid=1)
+--- Forum: Getting Started (https://forum.pine64.org/forumdisplay.php?fid=21)
+--- Thread: First Boot HDMI/USB problem (/showthread.php?tid=6828)
First Boot HDMI/USB problem - reefer - 11-18-2018
Hi all, I just got my pine A64+ 2GB I followed the steps on flashing multiple OS and here are my results:
archlinux-xfce-pine64-20181104
xenial-pine64-bspkernel-20161218-1
xubuntu-xenial-mate-20161215-longsleep-pine64-8GB
I connect my pine64 via hdmi Ethernet and a usb keyboard. It successfully loads into the login page but my keyboard does not power up. I'm stuck at the login page and I can't do anything.
I tried android-ver6.0-20170112-pine64-32GB.img as well and for this OS, the HDMI output does not show anything.
Any advice on how to make it work?
RE: First Boot HDMI/USB problem - tllim - 11-18-2018
(11-18-2018, 02:28 AM)reefer Wrote: Hi all, I just got my pine A64+ 2GB I followed the steps on flashing multiple OS and here are my results:
archlinux-xfce-pine64-20181104
xenial-pine64-bspkernel-20161218-1
xubuntu-xenial-mate-20161215-longsleep-pine64-8GB
I connect my pine64 via hdmi Ethernet and a usb keyboard. It successfully loads into the login page but my keyboard does not power up. I'm stuck at the login page and I can't do anything.
I tried android-ver6.0-20170112-pine64-32GB.img as well and for this OS, the HDMI output does not show anything.
Any advice on how to make it work?
1. There is a 4 pin jumper pin area on top of EXT connector, please make sure the you either connect to :power" or "batt", this jump route power to USB port.
2. Please plug in your USB keyboard to PC or notebook to confirm that your keyboard still function.
3. Make sure your 32GB microSD card is good performance one (class 10 type, perfer Samsung or Sandisk), Android demand high SD read access.