PINE64
Case options? - Printable Version

+- PINE64 (https://forum.pine64.org)
+-- Forum: ROCKPRO64 (https://forum.pine64.org/forumdisplay.php?fid=98)
+--- Forum: RockPro64 Hardware and Accessories (https://forum.pine64.org/forumdisplay.php?fid=102)
+--- Thread: Case options? (/showthread.php?tid=6752)



Case options? - joshuam - 11-07-2018

Most cases for the A64 will fit the RockPro64, correct?

Does anyone know of any case options with a fan? 

This is the only one I've found: https://www.c4labs.com/product/zebra-classic-case-pine-a64-upgrade-options/, but I'm not sure it will fit the RockPro64. Has anyone tried this case?


RE: Case options? - Luke - 11-07-2018

(11-07-2018, 03:09 PM)joshuam Wrote: Most cases for the A64 will fit the RockPro64, correct?

Does anyone know of any case options with a fan? 

This is the only one I've found: https://www.c4labs.com/product/zebra-classic-case-pine-a64-upgrade-options/, but I'm not sure it will fit the RockPro64. Has anyone tried this case?

Won't work because the Pro has 4 USB ports (2x USB 2.0 / 1x USB 3.0 + 1x USB -C ).

There is the ABS case and there will be a fancy all-metal black case for the Pro out at some point.


RE: Case options? - todd5200 - 11-15-2018

(11-07-2018, 03:59 PM)Luke Wrote:
(11-07-2018, 03:09 PM)joshuam Wrote: Most cases for the A64 will fit the RockPro64, correct?

Does anyone know of any case options with a fan? 

This is the only one I've found: https://www.c4labs.com/product/zebra-classic-case-pine-a64-upgrade-options/, but I'm not sure it will fit the RockPro64. Has anyone tried this case?

Won't work because the Pro has 4 USB ports (2x USB 2.0 / 1x USB 3.0 + 1x USB -C ).

There is the ABS case and there will be a fancy all-metal black case for the Pro out at some point.

I have the touchscreen case, and I have to tell you, if you ever see that graphene heatsink, it means you'll be lucky to fit a mid-profile heatsink under.  I have the tall profile with fan and I had to cut a hole with my dremel and put a fan guard over it.  The Pine store sells some really clean/professional looking cases ( the ABS ones ), but they're difficult to get back into without damaging the plastic.