PINE64
Kodi -> SPDIFAdapter -> External Decoder - Printable Version

+- PINE64 (https://forum.pine64.org)
+-- Forum: ROCK64 (https://forum.pine64.org/forumdisplay.php?fid=85)
+--- Forum: Rock64 Hardware and Accessories (https://forum.pine64.org/forumdisplay.php?fid=89)
+--- Thread: Kodi -> SPDIFAdapter -> External Decoder (/showthread.php?tid=6658)



Kodi -> SPDIFAdapter -> External Decoder - jufranz - 10-13-2018

Hi all,
I am thinking on getting an Rock64 to replace my old computer that serves as a the media center in my place.
By looking at the forums and at the almost non-existant docs on the DAC adapter I could not figure out if it will work on my case or not:

 - I want to run h265 from an NAS (gigabit) on Kodi and send the audio via the optical cable to be decoded on my external sound system. Does the board and daughter board support pass through audio including DTS?

Cheers! Heart


RE: Kodi -> SPDIFAdapter -> External Decoder - Raul1 - 10-27-2018

Never tried kodi and don't have the DAC adapter here, but I can confirm that the spdif device is working and capable of pass through.
I have just connected an optical transmitter directly to the pin header and tested pass through with "aplay -D hw:2" and a DTS 5.1 .wav file.


RE: Kodi -> SPDIFAdapter -> External Decoder - jufranz - 10-27-2018

That's great to hear! If pass through works from the terminal, it should work from any software.  Smile


RE: Kodi -> SPDIFAdapter -> External Decoder - jufranz - 10-27-2018

(10-13-2018, 01:09 PM)jufranz Wrote: Hi all,
I am thinking on getting an Rock64 to replace my old computer that serves as a the media center in my place.
By looking at the forums and at the almost non-existant docs on the DAC adapter I could not figure out if it will work on my case or not:

 - I want to run h265 from an NAS (gigabit) on Kodi and send the audio via the optical cable to be decoded on my external sound system. Does the board and daughter board support pass through audio including DTS?

Cheers! Heart

Just to confirm  is this using without a buffer just like you described here? https://forum.pine64.org/showthread.php?tid=5126
Do you mind sharing the hardware you've used and the pins?

Big Grin


RE: Kodi -> SPDIFAdapter -> External Decoder - Raul1 - 11-09-2018

Sorry for the late reply.

I got a TOTX147 from ebay, but I guess any with 3V supply voltage will do. No buffer needed. (Its on the DAC board for the coax spdif). Just connect GND (Pin 15), 3.3V (Pin1) and spdif (Pin13) and a 100nF Cap between GND and 3.3V. All pins on the smaller header.