PINE64
Check for aliveness Rock64 - Printable Version

+- PINE64 (https://forum.pine64.org)
+-- Forum: ROCK64 (https://forum.pine64.org/forumdisplay.php?fid=85)
+--- Forum: General Discussion on ROCK64 (https://forum.pine64.org/forumdisplay.php?fid=86)
+--- Thread: Check for aliveness Rock64 (/showthread.php?tid=6202)

Check for aliveness Rock64 - DuyLionTran - 06-22-2018

Hi,

I have just received my new ROCK64 2G, I burned the Debian on the SD card and it succeeded. But when I put the SD card into it, nothing happened. The STBY LED, PWR LED, IR LED lighted up but when I plugged it with the TV screen through HDMI, the TV screen didn't show up anything.

Is my ROCK64 dead or are the anything I need to config? Or are there any ways I can check for the life of my ROCK64?

Thank you

RE: Check for aliveness Rock64 - evilbunny - 06-22-2018

(06-22-2018, 10:07 PM)DuyLionTran Wrote: I have just received my new ROCK64 2G, I burned the Debian on the SD card and it succeeded.


What image did you flash to sdcard?

RE: Check for aliveness Rock64 - DuyLionTran - 06-22-2018

(06-22-2018, 10:24 PM)evilbunny Wrote:
(06-22-2018, 10:07 PM)DuyLionTran Wrote: I have just received my new ROCK64 2G, I burned the Debian on the SD card and it succeeded.


What image did you flash to sdcard?

I used the Debian Stretch Minimal Community Build Image,

thank you for your reply

RE: Check for aliveness Rock64 - evilbunny - 06-22-2018

(06-22-2018, 10:37 PM)DuyLionTran Wrote: I used the Debian Stretch Minimal Community Build Image,


Can you please paste the filename? The version in the filename would be helpful because some images are better than others.

RE: Check for aliveness Rock64 - pfeerick - 06-23-2018

(06-22-2018, 10:59 PM)evilbunny Wrote: Can you please paste the filename? The version in the filename would be helpful because some images are better than others.

Or at least a link to the page you downloaded it from, or details of how you access that image. Wink

As well as:

  1. What power supply are you using?
  2. What brand / size of microSD are you using (Samsung EVO is the most compatible/reliable to date)?
  3. What else is connected to the rock64 (other than your TV HDMI)?
Just so we get a better idea of what your setup so other factors can be eliminated.

RE: Check for aliveness Rock64 - Trash_Can_Man - 06-24-2018

I got several similar issues with a sd card that had problems or was about to die, in any case i replaced it and even if etcher was reporting no problems with the old card the new card worked like a charm, so, test the card and/or try another...