+- PINE64 (https://forum.pine64.org)
+-- Forum: ROCK64 (https://forum.pine64.org/forumdisplay.php?fid=85)
+--- Forum: Linux on Rock64 (https://forum.pine64.org/forumdisplay.php?fid=88)
+--- Thread: Cannot get stable LAN (/showthread.php?tid=6126)
Cannot get stable LAN - Mentaluproar - 05-31-2018
I have tried debian, OMV and OMV64 and something is working. The latest builds of OMV get me a SIP error every time I press a key on the keyboard. None of the three can get a stable LAN connection. The current debian build gets an IP address but I cant get any farther, even with an external USB network adaptor. it'a always throwing me "destination host unavailable."
Do I just have a bad board?
RE: Cannot get stable LAN - evilbunny - 05-31-2018
(05-31-2018, 07:09 PM)Mentaluproar Wrote: Do I just have a bad board?
Did you try using the 0.5.15 stable version? 0.6.x are mostly stable, but diagnosing problems is important...
RE: Cannot get stable LAN - Mentaluproar - 06-01-2018
(05-31-2018, 11:56 PM)evilbunny Wrote:(05-31-2018, 07:09 PM)Mentaluproar Wrote: Do I just have a bad board?
Did you try using the 0.5.15 stable version? 0.6.x are mostly stable, but diagnosing problems is important...
What image should I look for? Something from Ayufan?
RE: Cannot get stable LAN - evilbunny - 06-01-2018
(06-01-2018, 12:22 AM)Mentaluproar Wrote:(05-31-2018, 11:56 PM)evilbunny Wrote:(05-31-2018, 07:09 PM)Mentaluproar Wrote: Do I just have a bad board?
Did you try using the 0.5.15 stable version? 0.6.x are mostly stable, but diagnosing problems is important...
What image should I look for? Something from Ayufan?
yep...
https://github.com/ayufan-rock64/linux-build/releases/0.5.15
RE: Cannot get stable LAN - Mentaluproar - 06-01-2018
No luck. I tried the internal and a known good USB ethernet adaptor. In each case, the router sees it and gives it an IP address, but I cant go any further.
RE: Cannot get stable LAN - evilbunny - 06-01-2018
(06-01-2018, 08:40 PM)Mentaluproar Wrote: No luck. I tried the internal and a known good USB ethernet adaptor. In each case, the router sees it and gives it an IP address, but I cant go any further.
Have you tried other cables/switches in case it's the hardware connecting to your board?
RE: Cannot get stable LAN - Mentaluproar - 06-01-2018
First thing I tried. I didn't like how one of my old crimps looked so I swapped it out for a store bought, already crimped cable I had lying around. No change. No switch on this. It's connected directly to the router.
RE: Cannot get stable LAN - evilbunny - 06-01-2018
(06-01-2018, 10:49 PM)Mentaluproar Wrote: First thing I tried. I didn't like how one of my old crimps looked so I swapped it out for a store bought, already crimped cable I had lying around. No change. No switch on this. It's connected directly to the router.
You'll need to file a request at https://support.pine64.org/portal/home
Make sure you document everything you tried.
RE: Cannot get stable LAN - Mentaluproar - 06-01-2018
Okay, ticket submitted. I’ll let you know what I find out in case anyone else has a similar issue.