PINE64
sopine cluster thermal images - Printable Version

+- PINE64 (https://forum.pine64.org)
+-- Forum: PINE A64-LTS / SOPINE Compute Module (https://forum.pine64.org/forumdisplay.php?fid=66)
+--- Forum: Clusterboard (https://forum.pine64.org/forumdisplay.php?fid=91)
+--- Thread: sopine cluster thermal images (/showthread.php?tid=5513)



sopine cluster thermal images - maya.b - 12-29-2017

So it look like I have a failing module Undecided

   

They're in order from right to left 0 through 4, and sopine1 is running stupidly hot despite not doing anything as confirmed by the terminal screen cap. The outside modules are the coolest, while 2 and 3 are taking some extra heat.

   

Fans and forced air are on the way. Heatsinks are at the office, but sopine1 looks like it's toast (sic)


RE: sopine cluster thermal images - jbk - 12-29-2017

I wish IR cameras were cheaper. I've been wanting one since I started building printers. I wonder why that module is generating so much heat.


RE: sopine cluster thermal images - Luke - 12-29-2017

bummer :/ you sure its the module that's failing - does it also get hot on the stock baseboard ?


RE: sopine cluster thermal images - maya.b - 12-29-2017

(12-29-2017, 02:16 PM)Luke Wrote: bummer :/ you sure its the module that's failing - does it also get hot on the stock baseboard ?

sadly it's the module, on the baseboard it heats up to over 90C and then goes into thermal shut-down.


RE: sopine cluster thermal images - Luke - 12-29-2017

(12-29-2017, 02:26 PM)maya.b Wrote:
(12-29-2017, 02:16 PM)Luke Wrote: bummer :/ you sure its the module that's failing - does it also get hot on the stock baseboard ?

sadly it's the module, on the baseboard it heats up to over 90C and then goes into thermal shut-down.

Ah well, then RIP Sad