PINE64
Please try Slackware Arm Current on Rock64! - Printable Version

+- PINE64 (https://forum.pine64.org)
+-- Forum: ROCK64 (https://forum.pine64.org/forumdisplay.php?fid=85)
+--- Forum: Linux on Rock64 (https://forum.pine64.org/forumdisplay.php?fid=88)
+--- Thread: Please try Slackware Arm Current on Rock64! (/showthread.php?tid=5451)



Please try Slackware Arm Current on Rock64! - mwiljanen - 12-13-2017

This will be a set of scripts I have been using to create a disk image and public images I have created off the current rock64 ayufan kernel and combined with Slackware Arm Current.
Install Instructions:
  1. Download the latest slackware armhf release https://github.com/mwiljanen/slackrock/releases
  2. As a privileged user please run: zcat slackware-current-minimal-rock64-0.5.10-118-armhf.img.gz | sudo dd of=/dev/sdX bs=4M status=progress
  3. I have not created a script to autoexpand the drive so this must be done with gparted.
  4. After boot you can login with user user: rock64 and pass: rock64 this user has sudo access.
  5. To get this image on the internet you must use ifconfig or dhcpcd with an ethernet cable, Network manager is not installed on the slackware-minimal rootfs.
  6. After you get a connection to the internet now you can install all the packages, but do not install the slackwarearm-current kernels, you can blacklist these in the /etc/slackpkg/blacklist. If you install this kernel your rock64 will refuse to boot. To upgrade do these steps:
  • slackpkg update
  • slackpkg install-new
  • slackpkg upgrade-all
This upgrade will take over an hour or more, so please be patient and if you do the full install it will be about +9GB of space on your SD card so a 16GB card is not recommended for a full install.
Now you can enjoy slackware on you Rock64!
Enjoy!

mwiljanen


RE: Please try Slackware Arm Current on Rock64! - Luke - 12-13-2017

Thanks for this Smile


RE: Please try Slackware Arm Current on Rock64! - xalius - 12-13-2017

Nice work, thanks!


RE: Please try Slackware Arm Current on Rock64! - mwiljanen - 12-14-2017

Thank for the great responses, I am very glad to be using Ayufan's kernel with a distro I have been using for years, thanks for the support!


RE: Please try Slackware Arm Current on Rock64! - DanGraham - 04-06-2018

Hi, thanks for the Slack. I've tried using the rock64 - rock64 user and password but it's failing to authenticate. :-(

Sorry. I switched to console and found what I needed. Thanks