+- PINE64 (https://forum.pine64.org)
+-- Forum: ROCK64 (https://forum.pine64.org/forumdisplay.php?fid=85)
+--- Forum: Android on Rock64 (https://forum.pine64.org/forumdisplay.php?fid=87)
+--- Thread: EEMC installation - No devices found (/showthread.php?tid=5198)
EEMC installation - No devices found - WhiskerBiscuit - 09-30-2017
I've shorted the pins and hooked up a USB-USB cable (top port) and I'm getting "no devices found". I have a jumper installed as well.
Any idea what I might be doing wrong? When I plug the USB cable in I see "unkown device" in windows
RE: EEMC installation - No devices found - tllim - 10-02-2017
(09-30-2017, 03:40 PM)WhiskerBiscuit Wrote: I've shorted the pins and hooked up a USB-USB cable (top port) and I'm getting "no devices found". I have a jumper installed as well.
Any idea what I might be doing wrong? When I plug the USB cable in I see "unkown device" in windows
Please install the "DriverAssitant_v4.5" package first so that ROCK64 can be recognize as USB device. Here is the link: https://app.box.com/s/hympj3ihcjrnzzlyrapy1b1nfqpsc9kz
RE: EEMC installation - No devices found - MichaelRock - 06-12-2018
I have this issue too.
Drivers installed, the only cause may comes from using this: USB A - micro USB B <-> micro USB B /USB A adapter.
Rock64 powered up (+ eMMC module in place and jumper), cable connected, windows 7 does not even detect device.