Wake up Time from S3 - Printable Version +- PINE64 (https://forum.pine64.org) +-- Forum: PINE A64(+) (https://forum.pine64.org/forumdisplay.php?fid=4) +--- Forum: Linux on Pine A64(+) (https://forum.pine64.org/forumdisplay.php?fid=6) +--- Thread: Wake up Time from S3 (/showthread.php?tid=459) |
Wake up Time from S3 - ktc - 03-18-2016 I don't have access to a board yet but I am very curious about one aspect of the platform. I have an application that require low power and I need to put Pine64 into sleep most of the time. (S3). Once in a while, it needs to wake up and do some math calculations and go back to sleep. What type of S3 to active timing I should expect? I can optimize the Kernel such that it only has what I need. (No Display, Camera etc.) Thx RE: Wake up Time from S3 - hazerty - 03-18-2016 S3 sleep state it is only intel chips. A64 Soc, haven't got S3 sleep mode. the Pmic can put the Soc in sleep mode, and wakeup mode. RE: Wake up Time from S3 - ktc - 03-18-2016 (03-18-2016, 03:37 AM)hazerty Wrote: S3 sleep state it is only intel chips. I see. I studied the AXP803 datasheet and I see that it is possible to trigger a sleep/wake up functionality. I have a few questions: - Is the A64 driver for this already available? (i.e. using Sleep/Wake up functionality of AXP803) - Does the A64 doing STR (Save to Ram) in Sleep Mode? - What type of Wake up time I should expect? - What type of Sleep time I should expect? RE: Wake up Time from S3 - taros - 03-18-2016 The A64 can enter in deep-sleep mode. Some info at https://github.com/apritzel/pine64/blob/master/Booting.md http://forum.pine64.org/showthread.php?tid=386&pid=2982#pid2982 |