![]() |
HDMI "Format not supported" - Printable Version +- PINE64 (https://forum.pine64.org) +-- Forum: General (https://forum.pine64.org/forumdisplay.php?fid=1) +--- Forum: Getting Started (https://forum.pine64.org/forumdisplay.php?fid=21) +--- Thread: HDMI "Format not supported" (/showthread.php?tid=4525) |
HDMI "Format not supported" - sam452 - 05-11-2017 Loaded up the Longsleep Ubuntu on my working 2gb Pine. But on a working HDMI I'm getting "Format not supported." I didn't find anything in the Wiki or this forum. What should I try to get HDMI working?, sam RE: HDMI "Format not supported" - MarkHaysHarris777 - 05-11-2017 (05-11-2017, 03:45 AM)sam452 Wrote: Loaded up the Longsleep Ubuntu on my working 2gb Pine. But on a working HDMI I'm getting "Format not supported." I didn't find anything in the Wiki or this forum. The problem is that only a very few (two) mode lines are supported; this really comes down to having the right monitor. 720p60 or 1080p60 You may also be able to use a 1366x768 Samsung (vga | dvi) by using the hdmi-->vga adapter from the pine store (active interface) ; I have one of these setups working . My other two setups both use a modern 1920x1080p60 LG LED monitor ; I also have a Samsung 1920x1080p60 monitor that works very well. If you have an older monitor you're going to have trouble. RE: HDMI "Format not supported" - sam452 - 05-11-2017 Thank you for clarifying. Is there another linux distro that can support odd HDMI monitors from the 2GB Pine? thx, sam RE: HDMI "Format not supported" - Beta_Ravener - 06-11-2017 (05-11-2017, 09:10 AM)MarkHaysHarris777 Wrote:(05-11-2017, 03:45 AM)sam452 Wrote: Loaded up the Longsleep Ubuntu on my working 2gb Pine. But on a working HDMI I'm getting "Format not supported." I didn't find anything in the Wiki or this forum. Hi, I'd like to use Pine with my TV that has just the resolution you mentioned (Samsung LE26R32B - WXGA 1366 x 768 Pixel). The TV has VGA connector marked PC and also Jack hole next to it (together they are PC - IN group). So I would use this HDMI->VGA adapter from store, use jack-jack cable to connect Pine audio out to TV audio in and everything should work well? I'd be really glad to get this working since I already tried out Remix OS with Kodi on my FullHD monitor and I was quite pleased. However, connecting to the TV I currently get "Unsupported mode" error. |