PINE64
Stuck after getting connected to Internet - Printable Version

+- PINE64 (https://forum.pine64.org)
+-- Forum: General (https://forum.pine64.org/forumdisplay.php?fid=1)
+--- Forum: Getting Started (https://forum.pine64.org/forumdisplay.php?fid=21)
+--- Thread: Stuck after getting connected to Internet (/showthread.php?tid=3173)



Stuck after getting connected to Internet - Zettai - 01-24-2017

Hi all


I am having problems with my Pine64. I have followed all the steps, but once I connect the board to the internet, via the WiFI module or the ethernet cable, it stops working.
There is absolutely nothing I can do, the screen goes grey or black and that is all.

I can disconnect the cable and then try again and it will work, but as soon as I reconnect... gone.

Is there anything I can do?

I will appreciate any information you can give me Smile

(I'm trying the Android 6.0 IMG - I have a Pine 2GB board and I have tried other OS and the same happens)

Many thanks,


RE: Stuck after getting connected to Internet - xalius - 01-28-2017

Could be a power supply issue? Do you have a properly rated (2A+), non-charger USB supply with a good cable?


RE: Stuck after getting connected to Internet - Zettai - 01-28-2017

(01-28-2017, 06:34 AM)xalius Wrote: Could be a power supply issue? Do you have a properly rated (2A+), non-charger USB supply with a good cable?

Thank you so much, something that simple... It is working now! Smile Smile Smile


RE: Stuck after getting connected to Internet - xalius - 01-28-2017

No problem, glad that it was easy to fix :-)