PINE64
how to install Wifi/Bluetooth module - Printable Version

+- PINE64 (https://forum.pine64.org)
+-- Forum: General (https://forum.pine64.org/forumdisplay.php?fid=1)
+--- Forum: Getting Started (https://forum.pine64.org/forumdisplay.php?fid=21)
+--- Thread: how to install Wifi/Bluetooth module (/showthread.php?tid=2345)



how to install Wifi/Bluetooth module - danlcarr - 10-08-2016

Hi

I now have my pine64plus broad and need to know which way to install Wifi/Bluetooth module on it
because module the fits both ways
Have looked for a photo that shows this


RE: how to install Wifi/Bluetooth module - Bluphire - 10-08-2016

Look closely at the pins on the board and the connectors on the module. They are offset slightly. It will only go on one way with all the pins being used. Note the location of the antenna on the module itself in the picture below:

[Image: Screen%20Case%204_zpsmaveyezq.jpg]


RE: how to install Wifi/Bluetooth module - danlcarr - 10-08-2016

(10-08-2016, 09:16 PM)Bluphire Wrote: Look closely at the pins on the board and the connectors on the module. They are offset slightly. It will only go on one way with all the pins being used. Note the location of the antenna on the module itself in the picture below:

[Image: Screen%20Case%204_zpsmaveyezq.jpg]

Thank you!!