Overclocking available? - Printable Version +- PINE64 (https://forum.pine64.org) +-- Forum: PINE A64(+) (https://forum.pine64.org/forumdisplay.php?fid=4) +--- Forum: Pine A64 Hardware, Accessories and POT (https://forum.pine64.org/forumdisplay.php?fid=32) +---- Forum: Heat Dissipation and Overclock Topic (https://forum.pine64.org/forumdisplay.php?fid=41) +---- Thread: Overclocking available? (/showthread.php?tid=209) Pages:
1
2
|
RE: Overclocking available? - frodo_loves_metal - 01-28-2016 Pink liquid cooling is an absolute must! Haha. But not something I'll be pursuing RE: Overclocking available? - pine.tree - 01-29-2016 (01-28-2016, 03:55 PM)tllim Wrote:Thanks for the dimensions, now all i've got to do is wait until March(01-28-2016, 01:53 PM)frodo_loves_metal Wrote:The sandwich type acrylic case has around 20-22mm clearance (assume not install adapter on top), this should have enough clearance for ma good heatsink. The case height between two acrylic plate is 40mm.(01-28-2016, 01:20 PM)pine.tree Wrote: I measured the laptop fan, it is just under 20mm square. Does anyone know how tall the acrylic enclosure is? I might also put some fans on the side, totally out of the way of the board. I think there's a bit of room to all edges of the board, I could fit some fans in the outer perimeter of the case. RE: Overclocking available? - blktiger - 02-06-2016 (01-28-2016, 12:44 PM)frodo_loves_metal Wrote:(01-28-2016, 07:28 AM)pine.tree Wrote:(01-28-2016, 07:11 AM)taros Wrote: The dimensions of the A64 (the SoC) are 15mm x 15mm. There is enough clearance for up to about 20mm x 20mm. |