+- PINE64 (https://forum.pine64.org)
+-- Forum: PINE A64(+) (https://forum.pine64.org/forumdisplay.php?fid=4)
+--- Forum: Pine A64 Hardware, Accessories and POT (https://forum.pine64.org/forumdisplay.php?fid=32)
+---- Forum: LCD and Touch Panel (https://forum.pine64.org/forumdisplay.php?fid=37)
+---- Thread: LCD Panel Connected but does not work (/showthread.php?tid=2051)
LCD Panel Connected but does not work - maipercaso - 08-20-2016
Hi I have recently received my package containing the pine a64 mother board, with lcd display, package is missing the shutdown button, and also the abs case at the Moment.Anyway I received also the 7" LCD Display, I have connected the cables as it was documented in this Forum guide. I did not do any OS upgrade yet, but when I start the os boot up, Display does not light up. I tried to move the ribbon cables attached on the dsi port, and if moved, starts flashing like it was going to start, but then nothing.
I think that the Motherboard or the ribbon cable is defected. Any suggestions?
Thanks
RE: LCD Panel Connected but does not work - MarkHaysHarris777 - 08-20-2016
Make sure the cables are set, and do not 'move' them... leave them alone.
The only image that works with the LCD please, is the LCD Android image; try that.