HDMI doesn't work on rock64 - Printable Version +- PINE64 (https://forum.pine64.org) +-- Forum: ROCK64 (https://forum.pine64.org/forumdisplay.php?fid=85) +--- Forum: Linux on Rock64 (https://forum.pine64.org/forumdisplay.php?fid=88) +--- Thread: HDMI doesn't work on rock64 (/showthread.php?tid=18827) |
HDMI doesn't work on rock64 - Noung1991 - 10-30-2023 HDMI doesn't work with any Kernel except the Kernel 4.4 from Rockchip (it also doesn't work with xorg) i tried out all kernel configs from rockchip and ayufan always same error: [ 4.030085] printk: console [ttyS2] enabled [ 4.031672] rockchip-vop ff370000.vop: Adding to iommu group 1 [ 4.038101] rockchip-drm display-subsystem: bound ff370000.vop (ops 0xffffffc0108c27d8) [ 4.038924] rockchip-drm display-subsystem: failed to bind ff3c0000.hdmi (ops 0xffffffc0108c5f30): -517 [ 4.040292] rockchip-drm display-subsystem: master bind failed: -517 With Kernel 4.4 from Rockchip (ayufan) HDMI works: [ 3.167892] [drm] Initialized drm 1.1.0 20060810 [ 3.173651] [drm] Rockchip DRM driver version: v1.0.1 [ 3.174380] rockchip-drm display-subsystem: devfreq is not set [ 3.175647] rockchip-drm display-subsystem: bound ff370000.vop (ops 0xffffff8008d86950) [ 3.176798] i2c i2c-4: of_i2c: modalias failure on /hdmi@ff3c0000/ports [ 3.177487] dwhdmi-rockchip ff3c0000.hdmi: registered DesignWare HDMI I2C bus driver [ 3.178358] dwhdmi-rockchip ff3c0000.hdmi: Detected HDMI TX controller v2.11a with HDCP (inno_dw_hdmi_phy2) [ 3.180400] rockchip-drm display-subsystem: bound ff3c0000.hdmi (ops 0xffffff8008d7afa8) [ 3.181186] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.181851] [drm] No driver support for vblank timestamp query. [ 3.182495] rockchip-drm display-subsystem: failed to parse display resources [ 3.402118] rockchip-vop ff370000.vop: [drm:vop_crtc_enable] Update mode to 1280x1024p60, type: 11 [ 3.469911] Console: switching to colour frame buffer device 160x64 [ 3.503468] rockchip-drm display-subsystem: fb0: frame buffer device Xorg-log: X.Org X Server 1.20.5 X Protocol Version 11, Revision 0 Build Operating System: Linux 4.14.89-0-vanilla aarch64 Alpine Linux Current Operating System: Linux localhost 5.4.2 #1 SMP Thu Dec 12 03:04:42 CET 2019 aarch64 Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.4.2 modules=loop,squashfs,sd-mod,usb-storage modloop=/boot/modloop-5.4.2 extra_latent_entropy1 Build Date: 31 May 2019 06:21:31AM Current version of pixman: 0.38.4 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Thu Jan 21 10:28:08 2016 (==) Using system config directory "/usr/share/X11/xorg.conf.d" MESA-LOADER: failed to open rockchip (search paths /usr/lib/xorg/modules/dri) failed to load driver: rockchip MESA-LOADER: failed to open kms_swrast (search paths /usr/lib/xorg/modules/dri) failed to load driver: kms_swrast MESA-LOADER: failed to open swrast (search paths /usr/lib/xorg/modules/dri) failed to load swrast driver couldn't get display device (II) modeset(0): Initializing kms color map for depth 24, 8 bpc. The XKEYBOARD keymap compiler (xkbcomp) reports: > Warning: Unsupported high keycode 372 for name <I372> ignored > X11 cannot support keycodes above 255. > This warning only shows for the first high keycode. > Internal error: Could not resolve keysym XF86MonBrightnessCycle > Internal error: Could not resolve keysym XF86RotationLockToggle Errors from xkbcomp are not fatal to the X server (EE) /usr/share/libinput: failed to find data files (EE) Failed to load the device quirks from /usr/share/libinput and /etc/libinput/local-overrides.quirks. This will negatively affect device b. /usr/bin/startxfce4: X server already running on display :0 <stdin>:0: warning: Unknown encoding: C.UTF-8 xfce4-session: No GPG agent found xfce4-session: No SSH authentication agent found (xfce4-session:2231): xfce4-session-WARNING **: 10:28:10.365: xfsm_manager_load_session: Something wrong with /home/admin/.cache/sessions/xfc? (xfwm4:2278): GLib-CRITICAL **: 10:28:19.096: g_str_has_prefix: assertion 'prefix != NULL' failed (xfsettingsd:2284): GLib-CRITICAL **: 10:28:20.459: g_str_has_prefix: assertion 'prefix != NULL' failed (xfsettingsd:2284): GLib-GObject-CRITICAL **: 10:28:20.721: g_value_get_string: assertion 'G_VALUE_HOLDS_STRING (value)' failed (xfsettingsd:2284): GLib-GObject-CRITICAL **: 10:28:20.800: g_value_get_string: assertion 'G_VALUE_HOLDS_STRING (value)' failed Error relocating /usr/bin/Thunar: pango_attr_insert_hyphens_new: symbol not found xfsettingsd: No window manager registered on screen 0. xfce4-panel: No window manager registered on screen 0. To start the panel without this check, run with --disable-wm-check. No window manager registered on screen 0. To start the xfdesktop without this check, run with --disable-wm-check. xfce4-panel-Message: 10:28:33.334: Plugin "statusnotifier-7" was not found and has been removed from the configuration xfce4-panel-Message: 10:28:33.338: Plugin "pulseaudio-8" was not found and has been removed from the configuration xfce4-panel-Message: 10:28:33.377: Plugin "notification-plugin-10" was not found and has been removed from the configuration ** (wrapper-2.0:2315): WARNING **: 10:28:36.247: No outputs have backlight property (wrapper-2.0:2315): xfce4-power-manager-plugin-WARNING **: 10:28:36.920: Xfce4-power-manager: The panel plugin is present, so the tray icon g. (wrapper-2.0:2315): Gtk-WARNING **: 10:28:37.092: Negative content width -3 (allocation 1, extents 2x2) while allocating gadget (node button,) (xfdesktop:2311): GLib-GObject-CRITICAL **: 10:28:46.065: g_object_unref: assertion 'G_IS_OBJECT (object)' failed ^Cxinit: connection to X server lost waiting for X server to shut down ^VGdk-Message: 10:28:59.978: xfdesktop: Fatal IO error 38 (Function not implemented) on X server :0. Gdk-Message: 10:28:59.978: xfsettingsd: Fatal IO error 11 (Resource temporarily unavailable) on X server :0. I boot with extlinux.conf: The kernel starts only without console bootparameter: When i insert console=tty0 as boot paramter the kernel dont start. Does anyone know what the problem could be. Thank you in advance for your help RE: HDMI doesn't work on rock64 - as365n4 - 11-21-2023 Sorry, but Kernel 4.4 is pretty obsolete. Most distros using Kernel 6.x now and HDMI Video and Audio works just fine. Try Debian 12 Bookworm or Manjaro (select ARM and then the Rock64 from the drop down menu). |