+- PINE64 (https://forum.pine64.org)
+-- Forum: PINE A64(+) (https://forum.pine64.org/forumdisplay.php?fid=4)
+--- Forum: General Discussion on PINE A64(+) (https://forum.pine64.org/forumdisplay.php?fid=3)
+--- Thread: 7" Screen (/showthread.php?tid=1873)
7" Screen - abasel - 07-27-2016
I have managed to boot the Pine64 when connected to my HDMI on my TV. I am now trying to do the same with the 7" Screen that shipped with it. I have not been able to find any instructions on how to connected it but looking at the board and connector there appears to be only one way. I have connected the screen as appears to be the only way but nothing displays on it and it does not appear to light up in any way.
RE: 7" Screen - MarkHaysHarris777 - 07-27-2016
hi, the LCD display is not supported on gnu+linux yet; this is coming soon.
If you want to try the LCD with Android, be sure to use the LCD image; the regular image will not work.
Also, make sure your connectors are fully seated, with the connection pads facing down.
RE: 7" Screen - Ghost - 07-27-2016
(07-27-2016, 03:56 AM)MarkHaysHarris777 Wrote: hi, the LCD display is not supported on gnu+linux yet; this is coming soon.
If you want to try the LCD with Android, be sure to use the LCD image; the regular image will not work.
Also, make sure your connectors are fully seated, with the connection pads facing down.
Android LCD images can be found here.
Or for a direct download link, try this.
Burn in the same way as you burned the Debian image.