+- PINE64 (https://forum.pine64.org)
+-- Forum: ROCKPRO64 (https://forum.pine64.org/forumdisplay.php?fid=98)
+--- Forum: RockPro64 Hardware and Accessories (https://forum.pine64.org/forumdisplay.php?fid=102)
+--- Thread: SATA hotplug not working? (/showthread.php?tid=18703)
SATA hotplug not working? - JPT223 - 09-15-2023
Hi,
I set up a NAS but I realized SATA hot plug is not working.
Is it a limitation of my SATA adapter or doesn't it work in general?
Looks like I got a ASM1166 chip, but this is odd because the chip got 6 SATA lines but my card has 8 sockets.
this adapter is not optimal because it uses only 2 PCIe-Lanes.
I probably should by a new one. it was cheap, though
thanks
JPT
Code:
01:00.0 SATA controller: ASMedia Technology Inc. ASM1166 Serial ATA Controller (rev 02) (prog-if 01 [AHCI 1.0])
Subsystem: ASMedia Technology Inc. ASM1166 Serial ATA Controller
Flags: bus master, fast devsel, latency 0, IRQ 50
Memory at fa080000 (32-bit, non-prefetchable) [size=8K]
Memory at fa082000 (32-bit, non-prefetchable) [size=8K]
Expansion ROM at fa000000 [virtual] [disabled] [size=512K]
Capabilities: [40] Power Management version 3
Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit+
Capabilities: [80] Express Endpoint, MSI 00
Capabilities: [100] Advanced Error Reporting
Capabilities: [130] Secondary PCI Express
Capabilities: [170] Latency Tolerance Reporting
Capabilities: [200] L1 PM Substates
Kernel driver in use: ahci