+- PINE64 (https://forum.pine64.org)
+-- Forum: PinePhone (https://forum.pine64.org/forumdisplay.php?fid=120)
+--- Forum: PinePhone Software (https://forum.pine64.org/forumdisplay.php?fid=121)
+---- Forum: SailfishOS on PinePhone (https://forum.pine64.org/forumdisplay.php?fid=126)
+---- Thread: SFOS 4.4.0.72, with calls (/showthread.php?tid=17738)
SFOS 4.4.0.72, with calls - defactofactotum - 12-22-2022
The sailfishos port for pinephone, pinetab and pinephonepro is now updated to the latest sfos release 4.4.0.72. Current state: calls now work and wake device from deep sleep, but call audio is poor at the moment....everything else works except the following:
Not working - camera (waiting for development of libcamera);
Wifi disconnects after sleep, it needs to be toggled off and back on. The indicator shows it as still connected but if you check under Settings>Developer Tools you can see the WLAN IP address field is empty.
There is a new wiki for documentation: https://github.com/sailfish-on-dontbeevil/documentation/wiki
The flash-it script works for emmc and sdcards. The option "raw" to write an image on your pc is still broken.
Waydroid works but is very sluggish and a battery guzzler. In theory it needs 6GB ram so especially on original PP it's always going to be slow.
Update edit: after a period of about 3hrs the screen now longer wakes and the only option is to force shutdown (power button for 5 seconds) and reboot.
RE: SFOS 4.4.0.72, with calls - acrux - 12-25-2022
Initially posted here as this topic was not opened yet.
In addition to that:
1. After some time of inactivity mobile connection gets dropped and no way to recover when locked SIM
2. Was unable to mount my usbA/usbC combo stick (this worked in earlier versions as I used that for backup/restore)
3. Recreating sd card with flash-it gets mobile connection back as sim unlocking works during first-run-wizard. (Some racing condition during later reboots?) Voice quality during calling was not too bad
RE: SFOS 4.4.0.72, with calls - moodroid - 01-09-2023
(12-25-2022, 03:01 PM)acrux Wrote: Initially posted here as this topic was not opened yet.
In addition to that:
1. After some time of inactivity mobile connection gets dropped and no way to recover when locked SIM
2. Was unable to mount my usbA/usbC combo stick (this worked in earlier versions as I used that for backup/restore)
3. Recreating sd card with flash-it gets mobile connection back as sim unlocking works during first-run-wizard. (Some racing condition during later reboots?) Voice quality during calling was not too bad
I’ve tried this for a week, and I’ve got to say I’m pretty impressed.
Not quite perfect yet, but certainly good enough to get by.
Hope the updates keep coming
RE: SFOS 4.4.0.72, with calls - crocspot - 04-16-2023
Ok so I'm having a little trouble using the flash-it.sh script to install the Sailfish OS to my SD Card ?
I've followed the instructions @ https://github.com/sailfish-on-dontbeevil/documentation/wiki/Installation
and https://github.com/sailfish-on-dontbeevil/documentation/wiki
(Correctly I think)
I'm able to run flash-it.sh and I can select the No. 5 option for my new Pine Phone Pro however I just keep getting the error ;
UBoot image download failed. Aborting.
Not sure if I'm missing something bleeding obvious. Is it a problem with the script currently or am I doing something wrong ?
Any assistance is gratefully appreciated in advance
RE: SFOS 4.4.0.72, with calls - acrux - 04-16-2023
This is a known issue
Here in PINE64 › PinePhone › PinePhone Software › SailfishOS on PinePhone is another topic: Script not working
https://forum.pine64.org/showthread.php?tid=17694
I was able to fix the script using info provided there.
As you have a PinePhonePro, then I guess you have to use corresponding image instead of *book* image.
RE: SFOS 4.4.0.72, with calls - crocspot - 04-21-2023
(04-16-2023, 08:51 AM)acrux Wrote: This is a known issue
Here in PINE64 › PinePhone › PinePhone Software › SailfishOS on PinePhone is another topic: Script not working
https://forum.pine64.org/showthread.php?tid=17694
I was able to fix the script using info provided there.
As you have a PinePhonePro, then I guess you have to use corresponding image instead of *book* image.
Thanks for the help and response acrux will take a look and will see how I go
I'm "stumbling" around a little here will post on the Sailfish forum and see if I can get a little guidance on which is and where to get the correct Pine Phone Pro Sailfish image ?
Ta