+- PINE64 (https://forum.pine64.org)
+-- Forum: PinePhone (https://forum.pine64.org/forumdisplay.php?fid=120)
+--- Forum: PinePhone Software (https://forum.pine64.org/forumdisplay.php?fid=121)
+---- Forum: Arch Linux on PinePhone (https://forum.pine64.org/forumdisplay.php?fid=159)
+---- Thread: Phone no longer works at all (/showthread.php?tid=17482)
Phone no longer works at all - AndyM - 10-18-2022
Cannot make or receive calls now
Arch fully updated: Linux pinephone 5.19.8-1-danctnix
Phosh
Code:
$ lsmod
Module Size Used by
rfcomm 53248 16
qmi_wwan 36864 0
cdc_wdm 28672 2 qmi_wwan
usbnet 40960 1 qmi_wwan
mii 20480 1 usbnet
option 57344 3
usb_wwan 20480 1 option
rpcsec_gss_krb5 32768 0
nfsv4 409600 1
nfs 241664 2 nfsv4
bnep 28672 2
hci_uart 61440 0
8723cs 1482752 0
btrtl 24576 1 hci_uart
btbcm 24576 1 hci_uart
bluetooth 577536 42 btrtl,hci_uart,btbcm,bnep,rfcomm
cfg80211 405504 1 8723cs
sun50i_codec_analog 32768 1
sun8i_adda_pr_regmap 16384 1 sun50i_codec_analog
snd_soc_ec25 16384 1
ov5640 36864 1
gc2145 28672 1
snd_soc_simple_card 20480 3
snd_soc_simple_amplifier 16384 1
snd_soc_simple_card_utils 24576 1 snd_soc_simple_card
sun8i_codec 57344 1
sun4i_i2s 24576 2
sunxi_cedrus 53248 0
st_magn_spi 16384 0
st_sensors_spi 16384 1 st_magn_spi
sun6i_csi 28672 0
st_magn_i2c 16384 0
sun8i_ce 49152 1
inv_mpu6050_i2c 16384 0
st_sensors_i2c 16384 1 st_magn_i2c
snd_soc_bt_sco 16384 1
snd_soc_core 221184 8 sun4i_i2s,snd_soc_bt_sco,sun50i_codec_analog,sun8i_codec,snd_soc_simple_amplifier,snd_soc_simple_card_utils,snd_soc_ec25,snd_soc_simple_card
gpio_vibra 16384 0
st_magn 20480 2 st_magn_i2c,st_magn_spi
crypto_engine 20480 1 sun8i_ce
inv_mpu6050 32768 2 inv_mpu6050_i2c
crct10dif_ce 20480 1
joydev 24576 0
st_sensors 24576 3 st_magn_i2c,st_magn,st_magn_spi
v4l2_fwnode 20480 3 ov5640,gc2145,sun6i_csi
af8133j 20480 0
ecdh_generic 16384 2 bluetooth
ecc 36864 1 ecdh_generic
snd_pcm_dmaengine 20480 1 snd_soc_core
videobuf2_dma_contig 24576 2 sunxi_cedrus,sun6i_csi
snd_pcm 135168 5 sun4i_i2s,sun8i_codec,snd_soc_simple_card_utils,snd_soc_core,snd_pcm_dmaengine
v4l2_mem2mem 40960 1 sunxi_cedrus
rng_core 24576 1 sun8i_ce
snd_timer 36864 1 snd_pcm
i2c_gpio 16384 0
snd 90112 10 snd_timer,sun8i_codec,snd_soc_core,snd_pcm
soundcore 16384 1 snd
nfsd 393216 5
auth_rpcgss 69632 2 nfsd,rpcsec_gss_krb5
nfs_acl 20480 1 nfsd
lockd 106496 2 nfsd,nfs
grace 16384 2 nfsd,lockd
sunrpc 335872 26 nfsd,nfsv4,auth_rpcgss,lockd,rpcsec_gss_krb5,nfs_acl,nfs
fuse 131072 3
ip_tables 32768 0
x_tables 45056 1 ip_tables
ipv6 491520 60
sun4i_lradc_keys 16384 0RE: Phone no longer works at all - mikehenson - 10-18-2022
(10-18-2022, 07:46 AM)AndyM Wrote: Cannot make or receive calls now
Arch fully updated: Linux pinephone 5.19.8-1-danctnix
Phosh
I am up to date and phone calls work for me.
What firmware do do have on your modem? (I have the stock, not open source firmware)
Device: PinePhone 32G (Not Pro)
Linux: 5.19.8-1-danctnix with Phosh
RE: Phone no longer works at all - AndyM - 10-19-2022
Quote:What firmware do do have on your modem? (I have the stock, not open source firmware)
Not sure, how can I tell?
Not sure, but this does not look right:
Code:
$ mmcli -L
/org/freedesktop/ModemManager1/Modem/0 [QUALCOMM INCORPORATED] QUECTEL Mobile Broadband Module
$ sudo mmcli -m 0 --firmware-list
----------------
Firmware | list: n/a
$ sudo mmcli -m 0 --firmware-status
-------------------------------
Firmware | method: fastboot
| device ids: USB\VID_2C7C&PID_0125&REV_0318&NAME_EG25GGB
| USB\VID_2C7C&PID_0125&REV_0318
| USB\VID_2C7C&PID_0125
| USB\VID_2C7C
| version: EG25GGBR07A08M2G_01.002.01.002
-------------------------------
Fastboot settings | at command: AT+QFASTBOOT