camera module and lcd integration - Printable Version +- PINE64 (https://forum.pine64.org) +-- Forum: PINE A64(+) (https://forum.pine64.org/forumdisplay.php?fid=4) +--- Forum: Pine A64 Hardware, Accessories and POT (https://forum.pine64.org/forumdisplay.php?fid=32) +---- Forum: Camera Module (https://forum.pine64.org/forumdisplay.php?fid=38) +---- Thread: camera module and lcd integration (/showthread.php?tid=1744) |
camera module and lcd integration - jodybrown99 - 07-13-2016 is the camera module supposed to fit into the slot in the lcd panel? it's a bit big, and does not fit. see picture. https://imgur.com/uiJQq5s RE: camera module and lcd integration - MarkHaysHarris777 - 07-13-2016 This may take some creative 'maker' DIY ingenuinty. I don't have mine yet, so I have not played around with it... but I know that there is only one camera module supported at this moment. The Raspberry PI camera WILL NOT work. The opening may need to be altered with a dremel/ can't say anything too specific atm. marcus RE: camera module and lcd integration - blackt1ger - 08-07-2016 (07-13-2016, 07:22 PM)jodybrown99 Wrote: is the camera module supposed to fit into the slot in the lcd panel? it's a bit big, and does not fit. see picture. Yeah, same here. Absolutely crazy. Wait till you try to mount the LCD in the playbox enclosure. The cables aren't long enough. The sensor is 8.5 mm and the hole is 6.7...... Only thing you can do is cut the walls and glue it in. RE: camera module and lcd integration - MarkHaysHarris777 - 08-07-2016 Yeah, sadly, tllim says the enclosure was designed for the smaller camera, not the 5mp camera. RE: camera module and lcd integration - sduensin - 09-01-2016 Absolutely genius. :-( RE: camera module and lcd integration - hikaricore - 10-11-2016 Came here expecting to be disappointed, everything worked out as anticipated. XD Marks's dremel idea is probably the best option. Now, to make it work without damaging anything... |