+- PINE64 (https://forum.pine64.org)
+-- Forum: Quartz64 (https://forum.pine64.org/forumdisplay.php?fid=166)
+--- Forum: Quartz64 Hardware and Accessories (https://forum.pine64.org/forumdisplay.php?fid=169)
+--- Thread: 3D Model / Technical Drawings (/showthread.php?tid=17434)
3D Model / Technical Drawings - pitchbent - 10-05-2022
Hey there,
My Quartz64 just arrived. Looks fine, I am currently waiting for some storage to boot it from as well as a SATA card for NAS.
In the mean time I wanted to fabricate (probably 3D Print) a case - but there is no open source case available and I could not find a 3D model (or technical drawings besides the connector layout) for the Quartz64 so I could design my own.
Does anyone have technical drawings or the 3D model of the board? Or is it maybe of the same dimensions as the RockPro?
Thank you for the help & greets
pitchbent
RE: 3D Model / Technical Drawings - tophneal - 10-05-2022
Per the wiki "All enclosures that fit the ROCKPro64 should fit the Quartz64 Model "A", as the I/O has been laid out the same on purpose."
https://wiki.pine64.org/wiki/Quartz64#Model_%22A%22_2
RE: 3D Model / Technical Drawings - pitchbent - 10-05-2022
(10-05-2022, 11:51 AM)tophneal Wrote: Per the wiki "All enclosures that fit the ROCKPro64 should fit the Quartz64 Model "A", as the I/O has been laid out the same on purpose."
https://wiki.pine64.org/wiki/Quartz64#Model_%22A%22_2
Oh fuck me, I totally did not see that... Thank you kind sir!