+- PINE64 (https://forum.pine64.org)
+-- Forum: PinePhone Pro (https://forum.pine64.org/forumdisplay.php?fid=177)
+--- Forum: PinePhone Pro Software (https://forum.pine64.org/forumdisplay.php?fid=179)
+--- Thread: Monjaro Plasma Cell Network and Data not working properly (/showthread.php?tid=17376)
Monjaro Plasma Cell Network and Data not working properly - maiyuzhe - 09-21-2022
When I go to the available networks page in settings, all I get is
current operator: none
When I scan for more I get the error:
Scanning networks failed: Cannot scan networks: not enabled yet
I am able to temporarily receive texts if I run the command "sudo mmcli -m any -e", but after a while I go back to having "no carrier", and for this duration data does not work either, and the settings option for adjusting the APN is not highlighter, so I am unable to change it.
If there's anymore information I can post to help resolve this issue, please let me know.
RE: Monjaro Plasma Cell Network and Data not working properly - robocone - 09-23-2022
Did it used to work and then stop working? I have had this issue before but it was fixed after restart or
systemctl restart eg25-manager
I haven't seen it lately but I also updated my firmware from
https://github.com/the-modem-distro/pinephone_modem_sdk/releases
RE: Monjaro Plasma Cell Network and Data not working properly - maiyuzhe - 09-24-2022
(09-23-2022, 10:31 PM)robocone Wrote: Did it used to work and then stop working? I have had this issue before but it was fixed after restart or
systemctl restart eg25-manager
I haven't seen it lately but I also updated my firmware from
https://github.com/the-modem-distro/pinephone_modem_sdk/releases
Unfourtunately that did not work, I believe it has to do with two APNs trying to connect at once. How can I just totally reset the connections and networking?
Can I completely reset mmcli and nmcli?