+- PINE64 (https://forum.pine64.org)
+-- Forum: Quartz64 (https://forum.pine64.org/forumdisplay.php?fid=166)
+--- Forum: General Discussion on Quartz64 (https://forum.pine64.org/forumdisplay.php?fid=167)
+--- Thread: quartz64 model b 2x20 pin header (/showthread.php?tid=17277)
quartz64 model b 2x20 pin header - proj964 - 09-03-2022
can you provide the manufacturer and model number for the 2x20 pin header that is soldered onto the quartz64 model b?
RE: quartz64 model b 2x20 pin header - CounterPillow - 10-23-2022
I don't know the precise model number, but it's generic 2.54mm spacing, so there's a lot of manufacturers to choose mating connectors from.
If you want a mating connector that stacks (i.e. the pins are long enough to poke out the other side of the PCB), then SSQ-120-03-G-D should fit, but I'm sure there's cheaper options. For example this one looks good for $1, though isn't gold plated.
That's all of course assuming you're trying to build a board that plugs into the Quartz64 Model B and were trying to find mating connectors. If not, I apologise for the needless noise.
