1st boot - Printable Version +- PINE64 (https://forum.pine64.org) +-- Forum: Pinebook Pro (https://forum.pine64.org/forumdisplay.php?fid=111) +--- Forum: General Discussion on Pinebook Pro (https://forum.pine64.org/forumdisplay.php?fid=112) +--- Thread: 1st boot (/showthread.php?tid=17119) |
1st boot - chrisrook - 08-08-2022 I'm hoping some kind soul can help. My Pinebook pro arrived yesterday and booted into the installed Manjaro. After updating it requested a re-start, closed down and has not booted since. Pressing the power button brings up the green power button - but nothing happens. Any help much appreciated Chris RE: 1st boot - ckohn - 09-08-2022 I have the same problem and have been trying to load a new system from my SD (pinebookpro-debian-desktop-mrfixit191226.img) version that does boot fine. I have tried to dd the image to both mmcblk0 and mmcblk1 without luck. Any suggestions would be appreciated. Carl RE: 1st boot - mixmax - 11-10-2022 I can confirm the issue Unpacked my Pinebook Pro, was able to boot it up, connected to wi-fi, applied all software updates via stock packet manager GUI, then was offered a reboot and can't get it working since. RE: 1st boot - igorp - 11-11-2022 Proceed from here https://www.armbian.com/pinebook-pro/ RE: 1st boot - mixmax - 11-11-2022 (11-11-2022, 02:23 AM)igorp Wrote: Proceed from here https://www.armbian.com/pinebook-pro/ Armbian is more stable indeed, but after several days of experimenting I still have 3 major issues 1) loud popping sound when sound interface is initialized / put to sleep state 2) high-pitch hissing background noise due to PWM of PBP display 3) BT is not working at all (( I saw some workarounds / dirty hacks for the first two (keep sound interface busy / constantly play some .mp3 with 0 volume in the background and keep brightness at 100%) but still can't manage to get Bluetooth adapter to work under Armbian. Any guides / suggestions? RE: 1st boot - igorp - 11-15-2022 > Any guides / suggestions? Armbian forum? https://forum.armbian.com/tags/pinebook-pro/ https://www.armbian.com/bugs/ |