+- PINE64 (https://forum.pine64.org)
+-- Forum: PinePhone Pro (https://forum.pine64.org/forumdisplay.php?fid=177)
+--- Forum: PinePhone Pro Hardware (https://forum.pine64.org/forumdisplay.php?fid=180)
+--- Thread: Pinephone pro doesn't boot up anymore (/showthread.php?tid=17112)
Pinephone pro doesn't boot up anymore - giacomo986 - 08-07-2022
Good morning,
I tried to install mobian on emmc but I hadn't changed the bootloader, from that moment the phone doesn't turn on anymore.
I tried with sd card inserted, without sd card and holding down the RE button.
I tried to connect the phone to the PC but not with the lsusb command it never appears.
Is there any way to fix the phone? spare parts?
The Pinephone Pro is a beautiful project that I would like to learn more about.
Thanks for your attention,
Giacomo
RE: Pinephone pro doesn't boot up anymore - mburns - 08-09-2022
You can follow the procedures here. Or else a Mobian installation can be complemented or saved by installing Tow-boot.
https://wiki.pine64.org/wiki/PinePhone_Pro#The_installation_is_corrupted
RE: Pinephone pro doesn't boot up anymore - giacomo986 - 08-10-2022
(08-09-2022, 04:22 PM)mburns Wrote: You can follow the procedures here. Or else a Mobian installation can be complemented or saved by installing Tow-boot.
https://wiki.pine64.org/wiki/PinePhone_Pro#The_installation_is_corrupted
Thanks for the reply,
I tried to rewrite a microsd with a fresh mobian image but the phone never showed any signs of life.
Anyway thanks to the attempts made on your advice, I now see this command line output:
Code:
Bus 003 Device 010: ID 2207: 330c Fuzhou Rockchip Electronics Company RK3399 in Mask ROM modeI've done some research but don't know how to continue from here.
any suggestions?