+- PINE64 (https://forum.pine64.org)
+-- Forum: PinePhone (https://forum.pine64.org/forumdisplay.php?fid=120)
+--- Forum: PinePhone Software (https://forum.pine64.org/forumdisplay.php?fid=121)
+---- Forum: Mobian on PinePhone (https://forum.pine64.org/forumdisplay.php?fid=139)
+---- Thread: New SD card won't auto-mount, will only mount as read-only (/showthread.php?tid=17009)
New SD card won't auto-mount, will only mount as read-only - 3x5co - 07-15-2022
I just got a 256gb, off-brand MicroSD card (it's actually Onn brand, which is a Walmart generic brand). Anyway, I formatted it on my computer, and everything seemed fine. But when I put it into my Pinephone, it won't mount. I can only mount it like so:
Code:
sudo mount -t ext4 -o ro /dev/mmcblk0p1 /storage/0000-0000/;And if i put 'rw', it won't mount. It says 'bad superblock'. This is no matter how many times I reformat, if I recreate the partition table, If I disable journalling. I have even formatted it from inside the pinephone and it won't mount. Does anyone know what I can do to make my card auto-mount, and make it writable?
RE: New SD card won't auto-mount, will only mount as read-only - Zebulon Walton - 07-16-2022
Sounds like the SD card is defective.
RE: New SD card won't auto-mount, will only mount as read-only - 3x5co - 07-16-2022
Yeah. I'm just going to mark this as solved because that is the most likely answer. I'll just return it and get a higher-quality card.
RE: New SD card won't auto-mount, will only mount as read-only - dachalife - 07-16-2022
(07-16-2022, 09:36 AM)3x5co Wrote: Yeah. I'm just going to mark this as solved because that is the most likely answer. I'll just return it and get a higher-quality card.
I have the same problems with USB pen-drives or sd cards from the grocery store and I don’t know what it is; they never work.