+- PINE64 (https://forum.pine64.org)
+-- Forum: PINE A64(+) (https://forum.pine64.org/forumdisplay.php?fid=4)
+--- Forum: Linux on Pine A64(+) (https://forum.pine64.org/forumdisplay.php?fid=6)
+---- Forum: Debian (https://forum.pine64.org/forumdisplay.php?fid=24)
+---- Thread: Debian base(102) n xfce(101) does not boot (/showthread.php?tid=1700)
Debian base(102) n xfce(101) does not boot - HenryD - 07-09-2016
Hi,
I have downloaded debian base and xfce images from pine.pro and followed the 'getting started' linux instructions for dd'ing. Using either of these images to boot Pine64 causes the pwr LED to go out after about 2 seconds.
I have two 2GB boards which boot correctly with RemixOS or Android on SDcards provided by Pine64. Now I am using different SDcards for Debian but they are new Samsung EVO class 10 cards purchased from Newegg. I'll review the wiki about counterfeit cards though I think that is a dead end.
Other thoughts:
- MD5 good.
- e2fsck -nf good on ROOTFS.
# lsblk /dev/sdf
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
sdf 8:80 1 29.8G 0 disk
├─sdf1 8:81 1 50M 0 part
└─sdf2 8:82 1 3G 0 part
Thanks,
HenryD
PS. dd with bs=1m returns 'invalid number'. 1M worked. (From the 'Getting started' instructions.)
RE: Debian base(102) n xfce(101) does not boot - lenny.raposo-pine64.pro - 07-09-2016
Made the correction to the bs=1m to bs=1M sorry I missed it
RE: Debian base(102) n xfce(101) does not boot [RESOLVED] - HenryD - 07-09-2016
Lenny,
Happy to be of some small help.
@HenryD
My boot problem was resolved by a cold boot.. that is using the pwr btn for on/off is more like on/sleep.
HenryD