+- PINE64 (https://forum.pine64.org)
+-- Forum: PinePhone (https://forum.pine64.org/forumdisplay.php?fid=120)
+--- Forum: General Discussion on PinePhone (https://forum.pine64.org/forumdisplay.php?fid=127)
+--- Thread: no emmc after flash (/showthread.php?tid=16680)
no emmc after flash - ragele - 05-19-2022
sorry if this has been covered already. been using manjaro phosh feb release no issues til
today while trying to place a call it hung and then I could no longer open the calls app, place
or receive calls. I successfully flashed using jumpdrive but after it wont boot. if i place the
jumpdrive sd back in the phone i can see the jumpdrive splash on the phone but the emmc
is not visable any longer on my laptop. any ideas?
RE: no emmc after flash - fxc - 05-26-2022
(05-19-2022, 07:04 PM)ragele Wrote: sorry if this has been covered already. been using manjaro phosh feb release no issues til
today while trying to place a call it hung and then I could no longer open the calls app, place
or receive calls. I successfully flashed using jumpdrive but after it wont boot. if i place the
jumpdrive sd back in the phone i can see the jumpdrive splash on the phone but the emmc
is not visable any longer on my laptop. any ideas?
That would typically happen with a fully drained battery. In that case other OSes (except for Jumpdrive) won't boot either.
I would recommend to let the phone charge in Jumpdrive for a couple of hours. If the phone doesn't work properly after a reboot I would suggest trying to boot a different operating system from the microSD card and to then flash the eMMC from that OS.
RE: no emmc after flash - ragele - 05-29-2022
traced the problem back to a bad mobian image I had downloaded mixed with the problem of
going back and forth between mobian and manjaro without wiping emmc before flashing...
RE: no emmc after flash - fxc - 05-30-2022
(05-29-2022, 08:03 PM)ragele Wrote: traced the problem back to a bad mobian image I had downloaded mixed with the problem of
going back and forth between mobian and manjaro without wiping emmc before flashing...
Mind that Mobian comes without a bootloader now and requires Tow-Boot to be flashed manually.