+- PINE64 (https://forum.pine64.org)
+-- Forum: PinePhone (https://forum.pine64.org/forumdisplay.php?fid=120)
+--- Forum: General Discussion on PinePhone (https://forum.pine64.org/forumdisplay.php?fid=127)
+--- Thread: Cannot boot from SD on Convergence 3 GB model (/showthread.php?tid=15797)
Pages:
1
2
RE: Cannot boot from SD on Convergence 3 GB model - wibble - 01-24-2022
(01-20-2022, 04:19 PM)Natzer Wrote: I wonder though if I have accidentially omitted a step after these two earlier commandsYour mistake is writing the image to the first partition on the uSD card (sdb1) when you should be writing to the whole card (sdb), so the data the bootloader is looking for is in the wrong place.
sudo bmaptool copy ~/tmp_ubuntu/ubuntu-touch-pinephone.img /dev/sdb1
xz --decompress --stdout ~/tmp_postos/20220119-0539-postmarketOS-v21.12-sxmo-de-sway-1.7.0-pine64-pinephone-installer.img.xz | sudo dd of=/dev/sdb1 bs=4M status=progress
or if there is another reason that only etcher worked (the SD card is a newly purchased Samsung evo).