PIneTime reconnect script - Printable Version +- PINE64 (https://forum.pine64.org) +-- Forum: PineTime (https://forum.pine64.org/forumdisplay.php?fid=134) +--- Forum: General Discussion on PineTime (https://forum.pine64.org/forumdisplay.php?fid=135) +--- Thread: PIneTime reconnect script (/showthread.php?tid=15658) |
PIneTime reconnect script - kmsgli - 01-01-2022 Hey folks, I was having issues with my PineTime reconnecting to my PInephone after waking up from suspend. I noticed when I would cycle bluetooth on and off eventually it would re-connect. Arch wiki showed me a neat way to run a script on wake every time. I started playing with that and got a decent working reconnect script. I have tested it for a few days and now am curious if it will work well for other people using the PineTime with the PInePhone setup: PinePhone 3gb running Manjaro-Arm PineTime running InfiniTime 1.7. Amazfish as the companion app Here is the github with instruction and the script that will take your PineTime BT mac address and make a small shell script for connecting and a systemd service to fire that script any time the PInePhone wakes from suspend. It is enabled to start on boot and requires a restart of both PT and PP after the script is done. https://github.com/kmsgli/pt-connect/ I recognize this if probably not the best way to fix my reconnect issues but it seems to work for now and I am certainly open to suggestions if anyone thinks there is a better way to do this. |