PINE64
LCD Panel Viewing Angle? - Printable Version

+- PINE64 (https://forum.pine64.org)
+-- Forum: PINE A64(+) (https://forum.pine64.org/forumdisplay.php?fid=4)
+--- Forum: Pine A64 Hardware, Accessories and POT (https://forum.pine64.org/forumdisplay.php?fid=32)
+---- Forum: LCD and Touch Panel (https://forum.pine64.org/forumdisplay.php?fid=37)
+---- Thread: LCD Panel Viewing Angle? (/showthread.php?tid=156)



LCD Panel Viewing Angle? - KPhillisJr - 01-21-2016

I looked over the specifications for the LCD Panel and it does not accurately state the viewing angle.

Example good viewing angle: 178° (H) / 178° (V) - This is normally seen on IPS Screens.
Example poor viewing angle: 140° (H) / 120° (V) - This is highly common on TFT/TN based Panels.


RE: LCD Panel Viewing Angle? - tllim - 01-21-2016

(01-21-2016, 06:25 PM)KPhillisJr Wrote: I looked over the specifications for the LCD Panel and it does not accurately state the viewing angle.

Example good viewing angle: 178° (H) / 178° (V) - This is normally seen on IPS Screens.
Example poor viewing angle: 140° (H) / 120° (V) - This is highly common on TFT/TN based Panels.

On page 18,  min: 160° (H) / 160° (V), typ: 170° (H) / 170° (V)