+- PINE64 (https://forum.pine64.org)
+-- Forum: PINE A64(+) (https://forum.pine64.org/forumdisplay.php?fid=4)
+--- Forum: Android on Pine A64(+) (https://forum.pine64.org/forumdisplay.php?fid=5)
+--- Thread: GeChic 1303i - Monitor / Touchscreen (/showthread.php?tid=1534)
GeChic 1303i - Monitor / Touchscreen - Totalslaughter - 06-26-2016
Hi All,
Just received my board and was able to get it up and running on android image no problem. I have the 2GB board. I hooked it up to my GeChic 1303i monitor which is hdmi input for video and audio (both work) but there is a seperate USB output for touchscreen. When I hook the USB touchscreen output up to the Pine A64 board it doesn't work. I have used it previously with a raspberry pi and it worked fine, it is also advertised as being driver free touchscreen usable with windows 7, 8 and 10. I have been unable to find any driver for download so far an emailed the company to see about an android driver but don't have high hopes since I saw this on their website.
"Drivers for Android,Linux and Windows XP are avalable for ODM customers.
(Ps.The private users who don't have the related software too; wol not be able to install tese drives by themselves.)"
Maybe Pine A64 people can contact GeChic and acquire the driver / integrate it or offer it somehow for download / integration? It is an expensive monitor but a good fit with Pine A64 for people that already have one or don't mind spending a bit on one just need the touchscreen interface to work. Thanks.
RE: GeChic 1303i - Monitor / Touchscreen - GraciaRyan0102 - 01-03-2017
I have been using GeChic On-Lap 2501C for 6 months. I haven't face this kind of problem. You should contact service center. They will come and fix the problem.