![]() |
3D-Printable alternate top plate for the "Model A" open enclosure - Printable Version +- PINE64 (https://forum.pine64.org) +-- Forum: ROCKPRO64 (https://forum.pine64.org/forumdisplay.php?fid=98) +--- Forum: RockPro64 Hardware and Accessories (https://forum.pine64.org/forumdisplay.php?fid=102) +--- Thread: 3D-Printable alternate top plate for the "Model A" open enclosure (/showthread.php?tid=14776) |
3D-Printable alternate top plate for the "Model A" open enclosure - CounterPillow - 08-29-2021 Hello fellow PINEfriends, I have FreeCAD'ed up a little replacement top plate for the "Model A" acrylic open enclosure that you can 3D print at home. ![]() It features a cutout for the PCIe slot, as well as mounting holes for a 40mm fan. This obviously also works with the Quartz64, which has its PCIe slot in the same location. You can download the files directly from the wiki, it's licensed as CC-BY 4.0 (meaning you are allowed to sell 3d prints of these!) and includes a STEP and STL file. I've printed it from PETG using a 0.6mm nozzle. I gotta admit, the design is a little thinner than I'd have liked, but I'm not printing a 3rd revision for myself, so I'll leave playing with the thickness up to you. ![]() In the future, an official acrylic case with the PCIe slot cutout would be nice to see. |