+- PINE64 (https://forum.pine64.org)
+-- Forum: ROCKPRO64 (https://forum.pine64.org/forumdisplay.php?fid=98)
+--- Forum: General Discussion on ROCKPRO64 (https://forum.pine64.org/forumdisplay.php?fid=99)
+--- Thread: Fan doesn't spin (/showthread.php?tid=14583)
Fan doesn't spin - captainmorgan - 08-04-2021
I bought 2 pin fan and connected it to the fan header on the RockPro64 board. Installed OMV on the MMC, it boots up fine but the fan doesn't spin. Did I buy a broken fan/board or do I need to flick a switch somewhere?
RE: Fan doesn't spin - evilbunny - 08-05-2021
(08-04-2021, 08:34 AM)captainmorgan Wrote: I bought 2 pin fan and connected it to the fan header on the RockPro64 board. Installed OMV on the MMC, it boots up fine but the fan doesn't spin. Did I buy a broken fan/board or do I need to flick a switch somewhere?
You need ATS software to control the fan.
https://forum.pine64.org/showthread.php?tid=6489
RE: Fan doesn't spin - captainmorgan - 08-07-2021
(08-05-2021, 03:19 AM)evilbunny Wrote:(08-04-2021, 08:34 AM)captainmorgan Wrote: I bought 2 pin fan and connected it to the fan header on the RockPro64 board. Installed OMV on the MMC, it boots up fine but the fan doesn't spin. Did I buy a broken fan/board or do I need to flick a switch somewhere?
You need ATS software to control the fan.
https://forum.pine64.org/showthread.php?tid=6489
It seems the problem is with the OMV image. I've now installed Armbian and the fan started spinning immediately, no additional software was required.