+- PINE64 (https://forum.pine64.org)
+-- Forum: General (https://forum.pine64.org/forumdisplay.php?fid=1)
+--- Forum: General (https://forum.pine64.org/forumdisplay.php?fid=74)
+--- Thread: Another PBP with a case crack (/showthread.php?tid=13322)
Another PBP with a case crack - ab1jx - 03-05-2021
https://imgur.com/a/kqq1hpP
I noticed this when it was about a year old, I see other people are getting cracks too. I've had it open a few times, all the screws are back in it. Dropped it a couple times but it just slid off my lap onto carpet. Opening the lid causes the crack to open up.
![[Image: kqq1hpP]](https://imgur.com/a/kqq1hpP)
RE: Another PBP with a case crack - shjim - 03-06-2021
(03-05-2021, 11:52 AM)ab1jx Wrote: https://imgur.com/a/kqq1hpP"Dropping a few time " no really count as problem with PBP design or construction
I noticed this when it was about a year old, I see other people are getting cracks too. I've had it open a few times, all the screws are back in it. Dropped it a couple times but it just slid off my lap onto carpet. Opening the lid causes the crack to open up.
I sure you can order new case ..
RE: Another PBP with a case crack - ab1jx - 03-06-2021
Yes, but I have to do it very year? Parts availability seems to vary, one time I looked i found exactly what I needed, now I don't. I don't need the keyboard or touchpad, it's just a plastic piece. Some parts at https://pine64.com/product-category/laptop-spare-parts/?v=0446c16e2e66 or https://pine64.com/product/pinebook-pro-palm-case-with-ansi-keyboard/?v=0446c16e2e66
This is maybe my 10th laptop in 20+ years. This is what I'd call a hinge problem because too much resistance in the hinge causes the case to crack here. I have an HP downstairs that I gave up on opening and closing but it's still running fine. I gave away an Acer that I cobbed together with aluminum and JB Weld epoxy. I've bought several "fixer upper Dells", the last for $35. Search on eBay for "no hard drive", you're looking for machines that came off lease. Download the service manual PDF and search for the part numbers, you can find parts on eBay too, somebody bought out the factory's leftover stock.
I don't remember what's just inside this piece, I'd try to bridge it with metal on the outside held on with machine screws and glue. But I didn't expect to need to.
RE: Another PBP with a case crack - ab1jx - 03-06-2021
I did a quick search and dug up these 2 posts about similar cracks.
https://forum.pine64.org/showthread.php?tid=9658&highlight=crack
https://forum.pine64.org/showthread.php?tid=9212&highlight=crack
I almost wish I hadn't invested in putting a 1 TB nvme drive in it, but I've since bought a 2 TB to use in a USB adapter so I know I can take this back out.