+- PINE64 (https://forum.pine64.org)
+-- Forum: PinePhone (https://forum.pine64.org/forumdisplay.php?fid=120)
+--- Forum: PinePhone Software (https://forum.pine64.org/forumdisplay.php?fid=121)
+---- Forum: Manjaro on PinePhone (https://forum.pine64.org/forumdisplay.php?fid=130)
+---- Thread: Phone doesn't mount on laptop (/showthread.php?tid=13267)
Phone doesn't mount on laptop - lsitongia - 02-28-2021
When Jump Drive is running on the phone, plugging it into my Manjaro Plasma laptop via USB mounts the phone as a storage device. On the laptop, I can see the phone's eMMC and the SD card. But, when Manjaro Plasma mobile is flashed to the phone's eMMC and up and running, plugging it in doesn't mount anything. Nothing is logged on the laptop when the USB is plugged in and removed. I'm using the same red USB cable that came with the phone in both cases, Jump Drive and running system. What is different?
How do I get the phone to mount as a storage device on my laptop?
I'm running Manjaro Plasma mobile beta2.
Thanks!
RE: Phone doesn't mount on laptop - xalius - 03-02-2021
When you use Jumpdrive, it uses a special u-boot mode to expose the flash devices as mass storage. If you boot a normal OS, that feature is not something that comes as default behavior since the USB port is usually used in host mode, so you need to set that up yourself, filling in a device descriptor in sysfs and then exposing it to the outside world... roughly along the lines of https://linuxlink.timesys.com/docs/wiki/engineering/HOWTO_Use_USB_Gadget_File_Storage
RE: Phone doesn't mount on laptop - lsitongia - 03-02-2021
Ah, I see. That makes sense. Thanks for your help!