+- PINE64 (https://forum.pine64.org)
+-- Forum: PinePhone (https://forum.pine64.org/forumdisplay.php?fid=120)
+--- Forum: PinePhone Software (https://forum.pine64.org/forumdisplay.php?fid=121)
+---- Forum: UBPorts on PinePhone (https://forum.pine64.org/forumdisplay.php?fid=125)
+---- Thread: UBPorts Not Working (/showthread.php?tid=12666)
UBPorts Not Working - Pinoideae - 12-30-2020
I flashed the image to an SD card (https://ci.ubports.com/job/rootfs/job/rootfs-pinephone/), but when I load the card into the phone it won't start up. I used balenaEtcher-1.5.113-x64 to flash to the card.
PostMarketOS works.
Any thoughts?
RE: UBPorts Not Working - evilbunny - 12-30-2020
(12-30-2020, 03:31 AM)Pinoideae Wrote: I flashed the image to an SD card (https://ci.ubports.com/job/rootfs/job/rootfs-pinephone/), but when I load the card into the phone it won't start up. I used balenaEtcher-1.5.113-x64 to flash to the card.
PostMarketOS works.
Any thoughts?
That link says it's depeciated and it also says you should use the image on this page instead https://ci.ubports.com/job/rootfs/job/rootfs-pinephone-systemimage/
RE: UBPorts Not Working - Pinoideae - 12-30-2020
(12-30-2020, 04:45 AM)evilbunny Wrote:(12-30-2020, 03:31 AM)Pinoideae Wrote: I flashed the image to an SD card (https://ci.ubports.com/job/rootfs/job/rootfs-pinephone/), but when I load the card into the phone it won't start up. I used balenaEtcher-1.5.113-x64 to flash to the card.
PostMarketOS works.
Any thoughts?
That link says it's depeciated and it also says you should use the image on this page instead https://ci.ubports.com/job/rootfs/job/rootfs-pinephone-systemimage/
Thanks, that worked. Sound is not working though?
...
RE: UBPorts Not Working - neil_swann80 - 01-04-2021
No sound for me either. I'm hoping the next kernel update fixes it.
RE: UBPorts Not Working - KNERD - 01-06-2021
(01-04-2021, 01:52 PM)neil_swann80 Wrote: No sound for me either. I'm hoping the next kernel update fixes it.
I am getting sound, but it is so low to hear very well
RE: UBPorts Not Working - Pinoideae - 01-07-2021
(01-06-2021, 06:59 PM)KNERD Wrote:(01-04-2021, 01:52 PM)neil_swann80 Wrote: No sound for me either. I'm hoping the next kernel update fixes it.
I am getting sound, but it is so low to hear very well
I imaged a new OS to SD card and the sound works, but it's very soft, too.
RE: UBPorts Not Working - bujiraso - 03-13-2021
I'm trying to flash but when I boot I just get either a red light and no display or a Pine64 logo and it stays there (depending on if I hit power or plug in USB).
Does anyone else see this power-on issue? How long is initial boot?
Regarding the volume being too low, it could be related to https://gitlab.com/postmarketOS/pmaports/-/issues/926
RE: UBPorts Not Working - KNERD - 03-13-2021
(03-13-2021, 10:05 AM)bujiraso Wrote: I'm trying to flash but when I boot I just get either a red light and no display or a Pine64 logo and it stays there (depending on if I hit power or plug in USB).
Does anyone else see this power-on issue? How long is initial boot?
Regarding the volume being too low, it could be related to https://gitlab.com/postmarketOS/pmaports/-/issues/926
I would try using Etcher for the image.
Also after an update, the OS no longer can connect to the cell system of my provider. I know it is not hardware issue, as booting up Manjaro now connectsa to the provider. For a long time, I had an issue with manjaro connecting for a few seconds, then forever disconnecting.