LCD Enclosure on a budget! - Printable Version +- PINE64 (https://forum.pine64.org) +-- Forum: PINE A64(+) (https://forum.pine64.org/forumdisplay.php?fid=4) +--- Forum: Pine A64 Hardware, Accessories and POT (https://forum.pine64.org/forumdisplay.php?fid=32) +---- Forum: Enclosures (https://forum.pine64.org/forumdisplay.php?fid=14) +---- Thread: LCD Enclosure on a budget! (/showthread.php?tid=1223)

LCD Enclosure on a budget! - ajsullivan - 05-31-2016 I love my pine, but I was getting fed up of having the LCD panel dangling from the acrylic enclosure. I will be purchasing the playbook case as soon as it is available but until then I decided to MacGyver one using the existing pine64 carboard box. I used the bottom of the acrylic enclosure to give it a little bit of stability but you can do this without it. I screwed small screws into the cardboard to keep it sliding around (which is where I added the acrylic base). I cut out holes for all the ports, and then made small indentations for the LCD screen to sit in. I have used elastic bands to fix the screen. I hope you like it, and it makes you smile, I am quite please with it! Check out the pics. Alex RE: LCD Enclosure on a budget! - Luke - 05-31-2016 May not be most beautiful case I've seen but it looks functional alright Good job! RE: LCD Enclosure on a budget! - Ghost - 06-04-2016 It certainly made me smile