PINE64
3D Printed PinePhone stand - Printable Version

+- PINE64 (https://forum.pine64.org)
+-- Forum: PinePhone (https://forum.pine64.org/forumdisplay.php?fid=120)
+--- Forum: PinePhone Accessories (https://forum.pine64.org/forumdisplay.php?fid=123)
+--- Thread: 3D Printed PinePhone stand (/showthread.php?tid=12162)

Pages: 1 2

3D Printed PinePhone stand - simoni - 11-15-2020

I tried a few different stands for my PinePhone but they all seemed to be designed to be used only for display and/or charging and made the phone difficult to use.  So I decided to design a stand specifically for use during development and test.  The stand is strong and stable with a comfortable angle and allows you to use the touchscreen and buttons with one hand.  The design is in OpenSCAD and is GPLv3 - so feel free to use it an adapt as required.



https://github.com/simoninns/PinePhone-Dev-Stand



Here's a picture:



[Image: PinePhone_Stand_1_s.jpg]

RE: 3D Printed PinePhone stand - Lousy Fisherman - 11-15-2020

Very cool. Hoping this reduces the USB cable falling out easily.

Thank you
LF

RE: 3D Printed PinePhone stand - rocket2nfinity - 11-15-2020

Nice!

RE: 3D Printed PinePhone stand - Lousy Fisherman - 11-17-2020

Works like a charm. I found the fit between the tabs and slots was very tight. Other than that all the other problems were my newness to 3D printing. I think I will try to add a CE Dock holder as my first 3D design task.  It has been a very steep learning curve. Picture taken with my Pinephone    

RE: 3D Printed PinePhone stand - simoni - 11-18-2020

(11-17-2020, 10:28 AM)Lousy Fisherman Wrote: Works like a charm. I found the fit between the tabs and slots was very tight. Other than that all the other problems were my newness to 3D printing. I think I will try to add a CE Dock holder as my first 3D design task.  It has been a very steep learning curve. Picture taken with my Pinephone

Different printers have different tolerances; I tried to add a bit of slack into the slots; but it should be pretty clear in the OpenSCAD code what needs to change to make it even looser.

Anyway; glad it worked for you Smile  If you add in additional bits for the CE dock then you are welcome to make a push request to the github repo (or just link to your design and I'll include it if you are not familiar with github).

RE: 3D Printed PinePhone stand - arcanemachine - 11-20-2020

Nice work. I was inspired by your design, so I made something that was a little easier to print (also has a shorter print time and uses less material):

https://www.thingiverse.com/thing:4659409

[Image: featured-preview-pinephone-dev-stand-1.png]


EDIT: Made a second version that prints more quickly with less material, and makes it easier to plug/unplug the USB cable:

[Image: pinephone-dev-stand-v2.png]

"Imitation is the sincerest form of flattery."

RE: 3D Printed PinePhone stand - simoni - 11-20-2020

Looks great Smile The more designs to choose from, the better.

RE: 3D Printed PinePhone stand - Gribouille - 12-02-2020

Hello @simoni  and @arcanemachine,

Very nice jobs  Smile  I'm looking for something like that.

I've an idea, as yours stands are in two parts, could you find a way to fix the part with the hole for the USB-C cable in landscape position to use the Pinephone in landscape mode ?

RE: 3D Printed PinePhone stand - arcanemachine - 12-06-2020

(12-02-2020, 02:30 AM)Gribouille Wrote: Hello @simoni  and @arcanemachine,

Very nice jobs  Smile  I'm looking for something like that.

I've an idea, as yours stands are in two parts, could you find a way to fix the part with the hole for the USB-C cable in landscape position to use the Pinephone in landscape mode ?

I've been meaning to do that... If you want to check back in 2 or 3 days, I should have a new version ready.

If you don't want to wait (and are handy with FreeCAD), the FreeCAD files are in my Thingiverse link.

RE: 3D Printed PinePhone stand - Gribouille - 12-06-2020

(12-06-2020, 02:35 AM)arcanemachine Wrote:
(12-02-2020, 02:30 AM)Gribouille Wrote: Hello @simoni  and @arcanemachine,

Very nice jobs  Smile  I'm looking for something like that.

I've an idea, as yours stands are in two parts, could you find a way to fix the part with the hole for the USB-C cable in landscape position to use the Pinephone in landscape mode ?

I've been meaning to do that... If you want to check back in 2 or 3 days, I should have a new version ready.

If you don't want to wait (and are handy with FreeCAD), the FreeCAD files are in my Thingiverse link.

Hello @arcanemachine,

I'm waiting Smile

Thank you.