+- PINE64 (https://forum.pine64.org)
+-- Forum: PINE A64(+) (https://forum.pine64.org/forumdisplay.php?fid=4)
+--- Forum: Pine A64 Hardware, Accessories and POT (https://forum.pine64.org/forumdisplay.php?fid=32)
+---- Forum: Enclosures (https://forum.pine64.org/forumdisplay.php?fid=14)
+---- Thread: Enclosure dimensions (/showthread.php?tid=1213)
Enclosure dimensions - george - 05-30-2016
Hey guys.
Would anyone of you who have the correct board dimensions just pass it to me.
Thanks again.
RE: Enclosure dimensions - brf - 05-30-2016
George,
You can dig all of that out of my OpenSCAD source code, see my post of 5/23 below. Worked for my board,
I can't say all of them are the same. Best to have the board in hand, then design the case. Or at least,
check the numbers against reality.
RE: Enclosure dimensions - knightridar - 06-11-2016
try this
https://grabcad.com/library/pine64-a64-db-2gb-rev-b-1