+- PINE64 (https://forum.pine64.org)
+-- Forum: PINE A64(+) (https://forum.pine64.org/forumdisplay.php?fid=4)
+--- Forum: Linux on Pine A64(+) (https://forum.pine64.org/forumdisplay.php?fid=6)
+--- Thread: How to install Gentoo on Pine64 ? (/showthread.php?tid=1207)
How to install Gentoo on Pine64 ? - ilovegentoo - 05-29-2016
Hi,
I would like to know if there is any specific instruction on how to install Gentoo or Linux From Scratch on Pine64.
For raspberry pi I used to install raspbian and copy the firmware and kenrel files to my Gentoo installation.
I just wanted to know if there is any specific "setting" required in order to run a linux distribution on Pine64 or some firmware blobs and where I could find those.
Thank you very much in advance!
RE: How to install Gentoo on Pine64 ? - psychedup - 06-01-2016
(05-29-2016, 08:20 AM)ilovegentoo Wrote: Hi,
I would like to know if there is any specific instruction on how to install Gentoo or Linux From Scratch on Pine64.
For raspberry pi I used to install raspbian and copy the firmware and kenrel files to my Gentoo installation.
I just wanted to know if there is any specific "setting" required in order to run a linux distribution on Pine64 or some firmware blobs and where I could find those.
Thank you very much in advance!
I use Gentoo also, but I don't have my pine64 yet. I did basically the same thing on my raspberry pi - use the kernel and firmware that they provide and attach it to gentoo's stage3.
For the pine64, I would start with one of Longlseep's debian or ubuntu images. Keep the boot partition, and copy everything from /lib/firmware and /lib/modules into your Gentoo root.
There's an "experimental" stage3 for arm64 at http://distfiles.gentoo.org/experimental/arm64/ - it hasn't been updated in a little while but I was able to work with just fine the other day in a chroot environment.
RE: How to install Gentoo on Pine64 ? - xalius - 08-04-2016
I used the experimental stage3 tarball with one of longsleep's Ubuntu images and installed the system from an Ubuntu system running on my Pine (Gentoo card was in a USB cardreader). If you follow the normal steps from the Gentoo installation manual it just works... just leave out the partitioning and kernel / bootloader steps, dont forget to install the kernel modules as well and a sshd... after that I just built some necessary packages to get the platform scripts up and running... I can upload the image once I cleaned it up a little if people want to play with that...
RE: How to install Gentoo on Pine64 ? - MarkHaysHarris777 - 08-04-2016
Xalius, thank you.
... I have been testing one of Xalius' Gentoo images today; very nice work dude ! The Gentoo distro (with the longsleep kernel and newly integrated drm code) has corrected the frame buffer console cursor error (its been missing for a while). All subsequent kernel(s) should have this new fix shortly.
The Gentoo image is lean, mean, and clean ! I have not used Gentoo before now, but am finding this build to have what is expected; it is solid, stable, and a lot of fun too.
Again, Xalius thank you ! ( a very positive contribution )